|
|
|
#1
|
|||
|
|||
pop pressure off
Hi
I finally got around to pop testing my injectors nozzles, the range is from 130 Bar to 95 Bar and everywhere in between for the other 3. Would this cause a rough idle, smoking or any other symptoms? . What is the problem with out of spec nozzles?. These are Bosio nozzle and spray good with no leakage/dripping installed on my N/A engine Thanks
__________________
1979 300D. |
#2
|
||||
|
||||
On this motor you want the injectors to pop at 115 bar, plus or minus 3 bar. So you need some shims to get this in spec. Have you taken these injectors apart?
__________________
1985 300D-189k The 'UD', Ivory and Pinkamino 1979 300D-211k Dark Gray, Parchment A 1980 Harley-~166k and A 1994 Ford diesel pickup-349k and A 1990 gasser Volvo wagon-145k |
#3
|
|||
|
|||
I had them apart a few years ago when i installed the Bosio nozzles, but i did not test them at that time
__________________
1979 300D. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|