PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   Questions about 99 E300 turbodiesel M606.962, W210.025 (http://www.peachparts.com/shopforum/diesel-discussion/325131-questions-about-99-e300-turbodiesel-m606-962-w210-025-a.html)

Mauidieselpetr 09-10-2012 03:57 AM

Questions about 99 E300 turbodiesel M606.962, W210.025
 
I had all those 123, 124 and 126 benzes but this is new field for me...too many questions already. Have to figure out:
1. where to get excellent service manual
2. egr delete ?
3. ordered new cooling fan clutch, but looking at old one, cant see how to remove it ! another mercedes special tool?
4.transmission dipstick?
5.....
I think great service manual will answer a lot...not all..thats why we have forums....
Thanks for sharing your knowledge...
Aloha.
petr

Aquaticedge 09-10-2012 04:03 AM

your 99 will not have a dipstick for the trans. it's locked. the computer monitors It I guess.

there is an EGR delete thread for this particular engine OM606

there will most likely be a special tool or convaluted tool to take the fan clutch off. the way they did my 87 was certainly interesting to watch

sokoloff 09-10-2012 11:38 AM

Transmission dipstick is a separate tool. A search will bring up how to make your own and/or places to get one. They are about $30 on e-bay. I do not believe that the computer tracks the ATF level.

The Classic Center should soon have a new supply of the service CD's for the 210. They had to send their supply back to the manufacturer because there was some sort of problem with them.

TMAllison 09-10-2012 02:06 PM

Member Kartek created an EGR delete for the 606.962.

Fan clutch is held on by a center hex bolt. There is a special tool to hold the WP shaft and pulley while to lossen it. You may need to remove the front crossmember and pull the rad forward a bit to get some working room.

I've got the dip stick, inj and dv sockets and other odds and ends if anyone wants them. Pop tester too. No use for them anymore.


All times are GMT -4. The time now is 05:23 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website