|
|
|
#1
|
||||
|
||||
1983 240D, hit a curb, suspension damage
A little too fast in the rain turning into my neighborhood, into the median curb, BAM.
details of the carnage https://picasaweb.google.com/102106351327485959886/CarVsCurbCurbWon?authkey=Gv1sRgCK_W9cjS7JO_GQ Notice the left side guide rod, it is supposed to be straight but now it most definitely is not. Drivers side front tire pushed back to wheel well cover. Luckily the oil pan did not rupture. VStech and I are going to be fixing it, any advice??
__________________
The OM 642/722.9 powered family Still going strong 2014 ML350 Bluetec (wife's DD) 2013 E350 Bluetec (my DD) both my kids cars went to junkyard in 2023 2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles) 2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles) 1998 E300DT sold to TimFreeh 1987 300TD sold to vstech Last edited by whunter; 01-31-2014 at 08:44 AM. Reason: tweak title |
#2
|
||||
|
||||
Slow down on wet curves?
(Sorry could not resist).
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#3
|
||||
|
||||
You just need a little alignment job right?
__________________
Pete Williams, President emeritus - MBCA-International Stars (Eastern Mich.) Now Wi. & Az. 1985 300D Manual 4 speed Green Hen's tooth 1979 MGB triple black Az car nice 1969 back 1/2 of MGB (Az home built trailer) 1991 Volvo 245 Wagon Nice AZ Restored Gold Brick 1983 Jeep CJ7 37,600 Miles Summer use only |
#4
|
||||
|
||||
Chuckle
The bow shaped guide rod tube is stunning.
The wheel rim is impressive. . Last edited by whunter; 09-19-2012 at 07:21 PM. |
#5
|
||||
|
||||
Quote:
Takes a bit of force to bend a guide rod tube. What is the mounting area for the guide rod end like? Hopefully it has not been moved back at all. Once the rod tube is replaced it will be interesting to see how the adjustment of the castor goes.
__________________
Grumpy Old Diesel Owners Club group I no longer question authority, I annoy authority. More effect, less effort.... 1967 230-6 auto parts car. rust bucket. 1980 300D now parts car 800k miles 1984 300D 500k miles 1987 250td 160k miles English import 2001 jeep turbo diesel 130k miles 1998 jeep tdi ~ followed me home. Needs a turbo. 1968 Ford F750 truck. 6-354 diesel conversion. Other toys ~J.D.,Cat & GM ~ mainly earth moving |
#6
|
|||
|
|||
That damage looks eerily similar to how my car looked after a particular fun St. Patrick's Day in 2009. That car was an '83 rust bucket that I bought for 1100, drove for a year and sold for 600, damage done. Drove it for a year on WVO so I think I made my money back on it...
Hope you get it straightened out 100%! Your car looks much nicer than mine did.
__________________
1984 300TD Turbodiesel - 272k - Daily Duty 1985 300D Turbodiesel - 315k - "Recommended for competition events only" |
#7
|
||||
|
||||
Hmm
The guide rod mount may be ever so slightly tweaked.
|
#8
|
|||
|
|||
yikes thats impressive
|
#9
|
||||
|
||||
notice how close the left adjustment bolt is to the eccentric brace... and the clean area around it... also look at the LCA bushing angles... this is gonna be FUN to take apart!
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#10
|
||||
|
||||
what is bothering me about this car is this pic...
I have the car jacked up and supported on stands, and the guide rod contacted the brace on the left, it's bent. there's a dent in the metal, and the brace behind it is bent. a little hard to tell from this angle, but I'll get some better pics up tomorrow...
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#11
|
||||
|
||||
This is the second incident of this in a month, although under slightly different circumstances.......I have tested the traction turning in the rain, you'd have to be going pretty darn quick to drift and hit a curb....
I see the tires were "RAINFORCE".....oh the irony....
__________________
-diesel is not just a fuel, its a way of life- '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
#12
|
||||
|
||||
My 17 yo son was driving and our 14 yo son was in the passenger seat. They were coming home from band practice about 7:30 pm last Monday night. It had just lightly rained for a couple minutes and stopped. The asphalt road was very slick due to the oil rising to the top with the slight rain and no more behind it to wash it off.
He was coming off the main road (limit 45, he says he was doing somewhat less due to the rain) and began to make the right turn coming into our development. He understeered, he says he turned the wheel but the car kept going straight. He hit the 4" concrete median curb at a 45 degree angle. The median had a flower bed in it so the only casualty besides the car was a half dozen pansies. Car does not have ABS, I suspect he may have locked the front wheels when applying the brakes to make his turn. I think the slick asphalt caught him by surprise. He did the Richard Petty teen skid pad course at CMS last fall, he remembered what to do, let off the brakes, but just ran out of road to get it straightened out again before hitting the curb. What is important is that no one is hurt, the car can hopefully be fixed, and my kids are safe.
__________________
The OM 642/722.9 powered family Still going strong 2014 ML350 Bluetec (wife's DD) 2013 E350 Bluetec (my DD) both my kids cars went to junkyard in 2023 2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles) 2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles) 1998 E300DT sold to TimFreeh 1987 300TD sold to vstech |
#13
|
||||
|
||||
Answer
Quote:
. |
#14
|
||||
|
||||
Hey accidents happen! As they go this is one that could have happened to a lot of us.
I don't see clear evidence of bending on the base structure from the photos but it is also not clear there is not. Even if it is tweaked a bit it still may align fine as long as the adjustment limits have not been exceeded. You're in good hands there.
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#15
|
||||
|
||||
Now is the time to replace every worn front end part. Shocks, bushings, etc.
-J
__________________
1991 350SDL. 230,000 miles (new motor @ 150,000). Blown head gasket Tesla Model 3. 205,000 miles. Been to 48 states! Past: A fleet of VW TDIs.... including a V10,a Dieselgate Passat, and 2 ECOdiesels. 2014 Cadillac ELR 2013 Fiat 500E. |
Bookmarks |
|
|