|
|
|
#1
|
||||
|
||||
Valve Thruster Nut
Anyone have a good source for the larger of our 617 valve adjustment nuts ?
MB part number 615 053 00 72 I think its nuts (excuse the pun) to pay 6 to 10 bucks for a single nut. The lock nut, MB part number 153 990 02 51 I have located at under $2. I cant find a bigger picture either.
__________________
1985 300D 198K sold 1982 300D 202K 1989 300E 125K 1992 940T "If you dont have time to do it safely, you dont have time to do it" "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." |
#2
|
||||
|
||||
I looked around a little and if you can buy them for $6 somewhere that is a low price.
I suppose at the Junk Yard they would be cheap; but not new.
__________________
84 300D, 82 Volvo 244Gl Diesel Last edited by Diesel911; 12-10-2012 at 10:07 PM. |
#3
|
||||
|
||||
what happened to your old one? stripped?
I've got a can full of them if you need em shipped...
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#4
|
||||
|
||||
#4 intake is stripped for sure. Several others were obviously adjusted with something other than a 14mm.
I figure as long as I have the cam up, what better time to replace them all ?
__________________
1985 300D 198K sold 1982 300D 202K 1989 300E 125K 1992 940T "If you dont have time to do it safely, you dont have time to do it" "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." |
#5
|
||||
|
||||
It is indeed a crazy price for the new ones - we really need to know who makes this kind of stuff for Mercedes. There has to be a back door way of getting these parts for a reasonable price.
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior Don't leave that there - I'll take it to bits! |
#6
|
||||
|
||||
The smaller lock nut is apparently an MB only nut. 14mm flats are a non standard nut size. 153 990 02 51
Standard are 13mm and 15mm.
__________________
1985 300D 198K sold 1982 300D 202K 1989 300E 125K 1992 940T "If you dont have time to do it safely, you dont have time to do it" "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." |
#7
|
||||
|
||||
Of course if the valve thread was known and you were gonna lift the cam ...
__________________
1985 300D 198K sold 1982 300D 202K 1989 300E 125K 1992 940T "If you dont have time to do it safely, you dont have time to do it" "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." |
#8
|
||||
|
||||
Hey John, check your messages.
__________________
1985 300D 198K sold 1982 300D 202K 1989 300E 125K 1992 940T "If you dont have time to do it safely, you dont have time to do it" "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." |
#9
|
|||
|
|||
Do you have the right price?
A6150530072 adjusting nut is about €3 in Europe according to MB: http://et.mercedes-benz-clubs.com A1539900251 lock nut is about €7. Both are made from special hard steel, that might explain their high price. |
#10
|
||||
|
||||
Good question Govert.
I found a Laso Engine Valve Adjuster Nut for $1.74 / 1.32 Euro, the measurements sure look like the lock nut, Package Size (W x H x L): 0.50 x 0.20 x 0.50 inches
__________________
1985 300D 198K sold 1982 300D 202K 1989 300E 125K 1992 940T "If you dont have time to do it safely, you dont have time to do it" "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." |
#11
|
||||
|
||||
3.45 US Dollar vat in. for the cap nut.
The lock nuts are now gone but I have them locally for $1.74 / 3.32 euro. Thanks Govert
__________________
1985 300D 198K sold 1982 300D 202K 1989 300E 125K 1992 940T "If you dont have time to do it safely, you dont have time to do it" "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." |
Bookmarks |
|
|