Stuck injector
 

The #2 injector is stuck on my 2005 CDI. I can remove the other injectors but this one wil not go. I sprayed it with PB blaster and I let is soak for two days but nothing. I sprayed it with White lithium grease and nothing I used Freeze release and nothing. I tried to heat it with map gas but did not want to mess up the valve cover. I tapped on it for a hour from every side that I could.

For the last two days it has been hanging buy a wire from my engine lifter. I wrapped a doulbe SS wire around the base of the injector and hooked it onto the engine lift and lift it until the engine was raised a few inches. Tonight I mixed asitone with ATF 50/50 and poured it on.

Any other ideas?

I don't have any access to a Manual or have read anything on pulling the Injectors from your Vehicle. But, is it possible there is a special Tool for pulling stuck Injectors on your year and Model?
Added: I did an eBay Search = Mercedes CDI Injector Tools and they do have some. Don't know the specific one for your needs.