|
|
|
#1
|
|||
|
|||
Loss of engine temprature guage
Suddenly my tempruture guage on my 1990 350 sdl stopped working,I have a spare used that without successs,the sensor on the block is working, anyone has any idea what could cause that? or where I should start? thanking you guys in advance,
Pete |
#2
|
|||
|
|||
Welcome to the Forum.
I had a problem with my 85 300D suddenly pegging all the way Hot. sometimes the needle would fluctuate. When I turned the engine off and restarted, the gauge would read normal. I changed the temp sensor, changed the gauge etc.... took me a while. My problem was the ground strap from the block to the frame. most of the one`s I have seen are bolted to the Adapter plate to the Body on the drivers side under the engine. Charlie
__________________
there were three HP ratings on the OM616... 1) Not much power 2) Even less power 3) Not nearly enough power!! 240D w/auto Anyone that thinks a 240D is slow drives too fast. 80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works |
Bookmarks |
|
|