|
|
|
#1
|
|||
|
|||
98 E300 Key fob and alarm going NUTS !
my wife's 98 wont unlock doors with the electronic key and if I use the mechanical key the alarm would go ff even after inserting the key in ignition and starting the car
things I don't to stop alarm temporary Take 40 amp fuse off the under rear seat box it stops horn from going on but not lights from blinking dis connect and reconnect the vacuum pump would stop alarm and doors would work for a couple of minutes and goes bock to crazy no open mode I know there may have been water in there but you think the pump is shot ? can I disarm the alarm all together ? There was a thread here I read a while back about this problem but cant find it in the search anymore !
__________________
2003 GX470 1998 E300 3.0TD 2002 Dodge 2500 4x4 cummins 1998 Dodge 3500 5 speed Cummins |
#2
|
||||
|
||||
OK, part of the alarm circuitry runs through the board in the base of the vacuum pump. If water was ever under the seat back there, the board may be contaminated. I would remove the vacuum pump and examine the board for damage. I'm not sure if it'll work if it's disconnected though...
Linkage: Need Help! '02 E320 Literally Going Crazy!
__________________
-Evan Benz Fleet: 1968 UNIMOG 404.114 1998 E300 2008 E63 Non-Benz Fleet: 1992 Aerostar 1993 MR2 2000 F250 |
#3
|
|||
|
|||
Thanks that is very helpful
__________________
2003 GX470 1998 E300 3.0TD 2002 Dodge 2500 4x4 cummins 1998 Dodge 3500 5 speed Cummins |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|