|
|
|
#1
|
||||
|
||||
Helicoil in suspension bearing bracket
While removing the crossmember for a transmission fluid change, I found one of the three bolts into the suspension bearing bracket had stripped threads. This was on removal, so I must have messed it up several years ago.
Should I tap a larger size or go for a helicoil? I'd like to avoid the hassle or removing the whole bracket and fooling with the guide rod again if possible. This is for 1983 300SD
__________________
Greg Schwall 1983 300SD - 465,000 miles Last edited by GTStinger; 05-13-2013 at 10:53 AM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|