PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   ATTENTION - MAINTENANCE TIP!! (http://www.peachparts.com/shopforum/diesel-discussion/340476-attention-maintenance-tip.html)

HuskyMan 06-24-2013 09:04 AM

ATTENTION - MAINTENANCE TIP!!
 
In the past, the rubber boots on the rear axle drive shafts would crack and I would have to buy new ones and install them (hassle). Now, approximately once a month, I spray Mothers Protectant for Rubber and Vinyl on them (front and back - the back is not easy to get to) and so far this maintenance idea seems to be working well.

Doktor Bert 06-24-2013 11:26 AM

Seems like a good idea.....anybody have a thought on this?????????

Zulfiqar 06-24-2013 11:28 AM

being the OCD that I am - I spray 303 on them every 2 months. no difference yet, still the same surface cracks. Dunno maybe time will tell.

vstech 06-24-2013 11:38 AM

I don't think any protectant will fix the cracks... however, I don't think they will hurt anything, and may prolong the rubber somewhat.

Zulfiqar 06-24-2013 11:54 AM

I was not expecting filling the cracks - they have not got worse.. They do look very nice with the black rubbery shine rather than the dusty muddy pile they used to be.

fender_bender 06-24-2013 12:11 PM

Might as well hit the frond end bushings and boots while your at it.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta

eatont9999 06-24-2013 01:46 PM

How about some type of spray-on rubber or silicone to seal the cracks from the outside?

SD Blue 06-24-2013 01:59 PM

Quote:

Originally Posted by eatont9999 (Post 3165165)
How about some type of spray-on rubber or silicone to seal the cracks from the outside?

I bet the coating they use for dipping tool handles, I believe it is called Plasti Dip, would help to temporarily extend the life of the boots. Others have mentioned duct tape for this.

Plasti Dip Protective Coating Products | Plasti Dip Protective Coating Products | Rubber Dip Coating

It even comes in colors for a touch of customizing.:cool:

HuskyMan 06-24-2013 05:35 PM

Quote:

Originally Posted by Zulfiqar (Post 3165088)
being the OCD that I am - I spray 303 on them every 2 months. no difference yet, still the same surface cracks. Dunno maybe time will tell.

I use the 303 on the dash and it really looks great! For some reason I began using the Mother's several years ago on the rear axle boots and they seem to be holding well.


All times are GMT -4. The time now is 08:06 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website