Need Help Finding a Gasket
 

I was doing my oil pan gasket and trying to find all of my oil leaks so I can get them mended and found that I have a leak from the plate on the back of the oil filter housing. This is the plate that the turbo receives its oil supply from as well as where the oil pressure gauge. I temporarily "fixed" it with some gasket maker till I can find the correct gasket.

Any information on what the gasket is called would be appreciated.

The rear of the car is on the left of the below image.

http://img.tapatalk.com/d/13/06/30/aqenuge7.jpg

Art you talking about the oil filter housing gasket?

The gasket that goes between the engine and the filter housing? No. There is a plate that attaches to the backside of the housing, from which the turbo receives its oil supply. I need the gasket for that. If I can't find it, I'll probably just make one.

The blob of white in the pic was my attempt to temporarily fix the leak.

Check this thread out, not sure if he listed part numbers but he shows a good diy

http://www.peachparts.com/shopforum/diesel-discussion/340569-replacing-oil-filter-housing-gasket-om617-engine.html

Yep, saw that thread. No mention of a part number anywhere. I need the gasket for the part below.

https://lh4.googleusercontent.com/-6...80300sd603.JPG

Here ye go: 616 184 13 80.

6161841380 Oil Filter Gasket; Flange Gasket for Oil Pressure Switch Cover at Bottom of Oil Filter Housing

6161841380 Oil Filter Gasket; Oil Filter Housing to Engine Block

The Part Sellers mostly use the Mercedes Part Number or a West Pack Part Number; the West Pack Number starts W and you will see a number like W0133-1629653 which in this case is a Motor Mount.
So the Part Sellers themselves are a good resource for the Part Numbers.

Here is one of the Russian Part Sites
Russian part site.
http://www.auto-parts.spb.ru/cat/cats/m.mycat?cat=mb&client=dr2000

Thanks Gents! Pelican had the gasket. It's on the way.