PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   Effects of switching from green to G-05 coolant? (http://www.peachparts.com/shopforum/diesel-discussion/342460-effects-switching-green-g-05-coolant.html)

cooljjay 08-13-2013 03:05 AM

Effects of switching from green to G-05 coolant?
 
I have read many many threads on the differences but I have not seen any that have talked about, if anyone experienced any effects negative or good from switching out the green coolant to the g-05?

When I bought my car it had green coolant in it, and then I flushed everything and replaced the radiator....I put green back in it....its been less then a 2 years....I have been wanting to do a flush and refill as the car was so neglected and I opted to put in the correct g-05 this time...no idea how long green has been used in it...

I was surprised how long it took to get the hose water clear, I was also surprised to see some rust colored water come out....I was even more shocked to see my heater core water was as rusty as it was when I did the first flush....

So now I am curious if the famous g-05 will net me any effects negative or good...at least ones I might see...

shertex 08-13-2013 04:36 AM

The only effect I've noticed is peace of mind.

ah-kay 08-13-2013 12:16 PM

NONE, ZERO, ZILCH, NADA. In short no difference.
 
Except you will be lighter - money-wise.

Phillytwotank 08-13-2013 12:29 PM

It leaves a white residue on whatever it gets spilled or dripped

rscurtis 08-13-2013 12:45 PM

If you plan to keep the car, switch it to NPG. I just did my standby generator, and it seems to work fine. It can also be run at zero pressure and boils at 370*, so no more worries about overheating. It also eliminates problems with electrolysis, corrosion, and cavitation. It's a little pricey, but you only have to do it once. I'll probably do my signature car when the next AF change is due. www.evanscooling.com.

Zacharias 08-13-2013 03:08 PM

A difference that you can see? Not as far as I know.

Everyone has to make their own call on fluids. Some people would have you believe that your wheel bearings will seize solid and your family pets will all run away if you use anything except the Mercedes wheel bearing grease. I have a container of Lucas high temp that says otherwise.

That said, I have always used the correct coolant, even back in the days before G-05, when I had to go see Uncle Merciless at the parts counter to buy the factory stuff. From my point of view, being able to get the correct coolant at a chain store now is a bonus.

If you plan to change it every two years and you use the correct mix, it may make no difference. If after this change you plan to leave it in, I'd suggest for the price difference why take a flyer on Prestone?

I can tell you that I have been on Mercedes forums and discussion lists since 1995 and on every one, the people with the most experience -- and the mechanics present -- regarded the use of the correct coolant as religion, more so than anything else (synthetic vs dino, gear oil, etc.).

cooljjay 08-13-2013 03:16 PM

Quote:

Originally Posted by Phillytwotank (Post 3191518)
It leaves a white residue on whatever it gets spilled or dripped

That explains the white splatters on my valve cover....I was curious what caused it....my bleeder bolt is frozen solid so I have to pull the lower hose and fill it....some hit the ac pulley, and start up slung it all over..

vstech 08-13-2013 03:16 PM

if you have rust, you have sediment that's not been cleaned out.

period.

putting in the proper coolant will not make ANY difference if there is already contaminants present.

only way to see benefits from the correct coolant is to citric flush and drain EVERYTHING! pull the block drain, flush it TOTALLY CLEAN, pull the monovalve, and get all passages free of any sediment, pull the hoses to the heater core, and flush that, and

REMOVE ALL TAP WATER from the car.

flush with distilled once all traces of sediment, and rust are clean.

THEN after that's drained, you can fill with the proper mixture for your climate of DISTILLED water and G05/MB coolant, and IF you drain and flush and fill every 2 years, it'll be pristine for the rest of the vehicle's life.

if you do the same and use GREEN, it'll be fine, pristine and will last equally long.
on the turbo cars with the plastic tanks, it's said the G05 will better protect the plastic... YMMV

cooljjay 08-13-2013 04:07 PM

^^^^ agreed on all that, I am totally paranoid to try a citrus flush on this car, it has the evil servo system with the miles of piping and the car has sat for at least 20 years of its life....when I change the coolant, I pull as many hoses as I can and hook up a high pressure nozzle on the garden hose, that's as far as I want to go....I just know doing a citrus flush will kill the heater core...

Skid Row Joe 08-13-2013 04:12 PM

Quote:

Originally Posted by cooljjay (Post 3191646)
^^^^ agreed on all that, I am totally paranoid to try a citrus flush on this car, it has the evil servo system with the miles of piping and the car has sat for at least 20 years of its life....when I change the coolant, I pull as many hoses as I can and hook up a high pressure nozzle on the garden hose, that's as far as I want to go....I just know doing a citrus flush will kill the heater core...

Maybe a 36 year old car could use a new heater core? I've had heater cores malfunction @ less than 1/2 that age.

Skid Row Joe 08-13-2013 04:14 PM

Quote:

Originally Posted by vstech (Post 3191604)
if you have rust, you have sediment that's not been cleaned out.

period.

putting in the proper coolant will not make ANY difference if there is already contaminants present.

only way to see benefits from the correct coolant is to citric flush and drain EVERYTHING! pull the block drain, flush it TOTALLY CLEAN, pull the monovalve, and get all passages free of any sediment, pull the hoses to the heater core, and flush that, and

REMOVE ALL TAP WATER from the car.

flush with distilled once all traces of sediment, and rust are clean.

THEN after that's drained, you can fill with the proper mixture for your climate of DISTILLED water and G05/MB coolant, and IF you drain and flush and fill every 2 years, it'll be pristine for the rest of the vehicle's life.

if you do the same and use GREEN, it'll be fine, pristine and will last equally long.
on the turbo cars with the plastic tanks, it's said the G05 will better protect the plastic... YMMV

This sounds like the proper approach to me.......

cooljjay 08-13-2013 04:28 PM

Quote:

Originally Posted by Skid Row Joe (Post 3191653)
Maybe a 36 year old car could use a new heater core? I've had heater cores malfunction @ less than 1/2 that age.

Probably can but what I have heard....heater cores have gone the way of the dodo bird and the radiators are following....simply put they are dust in the wind....

vstech 08-13-2013 05:25 PM

Quote:

Originally Posted by cooljjay (Post 3191662)
Probably can but what I have heard....heater cores have gone the way of the dodo bird and the radiators are following....simply put they are dust in the wind....

um... what?

Zacharias 08-13-2013 05:33 PM

Quote:

Originally Posted by vstech (Post 3191691)
um... what?

I think he means parts availability/cost/quality issues.

cooljjay 08-13-2013 06:43 PM

Quote:

Originally Posted by Zacharias (Post 3191697)
I think he means parts availability/cost/quality issues.

Yes more normal way of putting it....the non turbo radiators are NLA and the few out there are 550$ plus....I paid 140$ for my behr replacement to years ago....I am sure if a heater core could be located it would be with in that same figure....and face it, if I have to tare the dash out of the car for a heater core replacement....I am putting in a manual system..:cool:


All times are GMT -4. The time now is 03:02 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website