Replaced antenna mast on one of my cars. Nylon cable fed in fine but mast only goes halfway down. It's POSSIBLE I got the wrong mast. It's also possible that a section of cable from old mast is stuck in antenna. No really interest in taking things apart. If I incrementally shorten the cable and reinstall, would that be one way to get it to go all the way in?

__________________
14 E250 Bluetec 4Matic "Sinclair", Palladium Silver on Black, 154k miles
06 E320 CDI "Rutherford", Black on Tan, 172k mi, Stage 1 tune, tuned TCU
91 300D "Otis", Smoke Silver on Tan, 142k mi, wastegate conversion, ALDA delete

19 Honda CR-V EX 61k mi
Fourteen other MB's owned and sold
1961 Very Tolerant Wife

As long as you don't want the antenna to go up all the way.

__________________
1985 300 TD 448K
1984 300 TD 278K

1983 240D euro 240k
1994 f-250 idi turbo 330K
1986 f-350 IDI
1987 F-350 IDI

1985 JD 1050 4wd
1965 IH 3660

Don't cut a new mast cable. Just pop the cover off the antenna motor and remove the old piece. It is worth doing the job correctly.

__________________
1991 F250 super-cab 7.3 IDI. (rebuilt by me) Banks Sidewinder turbo, hydroboost brakes, new IP and injectors.
2003 S430 - 107K
1983 300SD - Tanoshii - mostly restored ~400K+.
1983 300SD - Good interior. Engine finally tamed ~250K.
Monark Nozzle Install Video - http://tinyurl.com/ptd2tge