![]() |
W126 console controls all the same?
I had speakers left side (F&R), but lost front, so now I only have left rear speaker working. I'm guessing the fader....but open to other suggestions.
Are the faders all the same for W126 (I have a '90 350SDL)? I see one on eBay for 420SEL, but look up table says "not compatible....anyone know if the table is simply wrong (or simply leaves the 350SDL out)? Thanks, PK |
Do you have the original head unit or something newer?
Most people just bypass the fader and let the newer head unit control that function. Jeff |
They're the same to '87 or '88 then MB went to a split system with the controls in the dash and the tuner and amps in the trunk. The fader for the later system is not interchangeable with the early fader. The fader from a similar vintage W123 (280E, 300D/CD/TD) is functionally compatible but I don't know if it fits the W126 console and socket.
Sixto 87 300D |
Quote:
Sixto- I believe this has amp behind the rear seat..... |
I don't know why I thought you have an 86-87 SDL when you said 90 SDL. Don't trust eBay application guides for everything, particularly low volume cars like the 350SDL. Amazon's application guide says the '87 300D doesn't use the same front brake pads as the '87 300E, which it does.
Later 126s have separate left and right amps but IIRC it's the same amp twice. Sounds like you need at least one. I suppose it could be a bad fader but by design the signal passes through 'unfaded' with the thumbwheel in the middle position so it wouldn't be the first thing to suspect when you lose signal to a speaker. Are there self-serve wrecking yards where you are where you can get a bucket of amps and faders for $10? Check the parts forum for late 126s being parted. Sixto 87 300D |
There are 3 different consoles... the Gen1 from 80-85, the early Gen2 from 86-90, then the latest version for cars that have the brake shift interlock.
Your car also has 2 amps behind the rear seat. Small black boxes. Each amp drives the speakers on that side of the car. -J |
All times are GMT -4. The time now is 01:19 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website