83 300SD removed seat to work on springs
 

83 300SD I removed seat to work on springs and when I removed the electric plug on front of the seat then all the wires came out of the plastic case that holds them. It is located on seat. I need to know what wires go where. :(

Thanks

the bends in the wires make it fairly simple to put them back where they were, but if you post a picture, we can help you get them back in place.

Wire diagram would help me. I have same color wires so looking at other seat did not help. Need to know what motor goes to what pin then color combo.

Thanks for the idea.

The bends did not help find what went where. :(

This link should help out with sorting the wiring:Mercedes-Benz 126 Service Manual Library

If you can't get it from there, let me know what the colors of the wires are and then we can find out what connector you are dealing with.

The manual doesn't work. comes up with errors. blue,black,green,green,white,white,gray,orange
this is the pin out:
1 3 5 7

2 4 6 8

FYI
 

The manual does work.
Mercedes-Benz 126 Service Manual Library

Use Internet Explorer

Remove all versions of JAVA on your computer using add or remove programs or programs and features in the control panel.

Go to Where can I get the latest version of Java 6?

Download the 32 BIT version of JAVA, version 38, install and retry EPC.net.

32 BIT is required for EPC.net and version 6.

Version 7 or 64bit versions are not supported at this time.

http://www.peachparts.com/shopforum/general-information/248948-mercedes-service-manual-source-cd-dvd-paper.html

Firefox doesn't work. Thanks for the heads up

Non-memory seat
1) orange
2) gray
3) violet
4) blue
5) yellow
6) green
7) black
8) white

OK, got electrical diagram, It calls out blue and violet wires. Problem is I have 2 yellow and 2 green. Solution: traced wires back and found blue and violet sleeving on the wires. Fixed wiring and it all works again.
Thanks for the help.