PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   How many stickers do you want? (http://www.peachparts.com/shopforum/diesel-discussion/34862-how-many-stickers-do-you-want.html)

DieselHead 03-31-2002 03:49 PM

How many stickers do you want?
 
Well, it seems like we're in our last phase of sticker planning before I find a good printer and send the design off to be printed. In this thread I'd like you to tell me how many stickers you'd like assuming reasonable cost. From my last poll, it seems that there are 40 people interested in purchasing stickers, and because the majority voted for only one printed design, there will only be one sticker, #4 in the sticker design poll thread.

So far I have the following people down for the following amounts. If any other would like more than one sticker, please post your request here so I can figure out how many to print so that I don't get stuck with a huge surplus. Thanks

The Warden- 2
TXBill- 10 (or so)
r90skirk- 6 (or so)
mjkinsley- 6-8
bobco- 5
silverfishk8- 5
yer-ol-pal- 4

This is the tally thus far. Again, if anyone would like more than one, please post here. Otherwise, I'm going to assume that the other 33 people only want one. If any of the above mentioned members want to change their requested number, please post with the correction. If anyone wants a sticker but didn't vote for wanting a sticker, post here but you should have voted!

I will look into payment methods but will trust you to get me payment whenever you can. I will keep this tally thread running until friday. On Saturday I will tally up the number of stickers I need to have printed, add a few for surplus, then spend next week finding a printer. I hope to have the stickers sent to be made by the end of next week.

I would really appreciate it if everyone who wants one but didn't vote please let me know BEFORE I get them printed. Same with quantity request changes. Thanks, help make my life easier :)

Alex

TXBill- if you could post this as a sticky to replace the poll that would be great, thanks

DieselHead 03-31-2002 03:53 PM

1 Attachment(s)
Just so there are no questions, this is the sticker that you are buying. Thank you to everyone who contributed an idea for this sticker. Special thanks to Mike Kinsley who designed the image we are using.

CJ 03-31-2002 05:09 PM

I would like 3 stickers.

Diesel Power 03-31-2002 05:20 PM

I'll take two.

burnan 03-31-2002 06:31 PM

I would like three.

jbaj007 03-31-2002 07:22 PM

One please

roscoe 03-31-2002 08:20 PM

What are the dimensions of the sticker?

Aaron 03-31-2002 10:30 PM

I WANT THREE!!

unkl300d 03-31-2002 10:38 PM

Very nice sticker


I'll order three (3).

Drei

Tres

III


:D




Thanks for doing this Diesel Head.

DieselHead 03-31-2002 11:51 PM

roscoe,
I think it'll be about 3 X 3, or maybe 4 X 4, haven't decided yet.

Alex

HGV 04-01-2002 01:29 AM

Put me in for 4.

Can you make one that also says;
"Spark free and running hot"

Henry

shawnster 04-01-2002 02:38 AM

Excellent job on the design, thanks!
I'll take 3, please.

jcd 04-01-2002 07:40 AM

I'll take 5
 
Nice work, great sticker, thanks for the work and kudo's to the designer.

JCD

BobK 04-01-2002 07:52 AM

I would like two please. ( put new starter in 300D a week ago and fingernails are just now coming clean. Did, however figure out trick to getting it loose.)

mjkinsley 04-01-2002 08:05 AM

I think the deacal should be 4"x4" min. If you have doubts, print it out to measure 4"x4" and look at it from a distance. It may need to be 5x5, but that might take up too much window space.

I'll be looking into altering the design to make it a white outline logo to be used as a clear window sticker. I think white lines read better than black on window stickers. Any thoughts?

Oh yeah, I'm good for 6.

Mike


All times are GMT -4. The time now is 03:18 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website