|
|
|
#1
|
||||
|
||||
spring compressor question
Mercedes Klann Coil Spring Compressor Tool W123 W124 W201 W202 W203 W210 R129 | eBay
it says it works for the front springs for the w123 and w201 it says it works for the rear springs for the w201 so how do you remove the rear springs on the w123?
__________________
Ben 1987 190d 2.5Turbo |
#2
|
||||
|
||||
just unbolt the diff, and lower the control arms... negligible tension on the rear springs of any of the cars... 123 same.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#3
|
|||
|
|||
Quote:
that tool is missing the two larger plates for the rear springs, and it has 2 center tools and you only need one. weird item, I have a compressor that came with 4 plates and one center tool which I believe is the typical arrangement for these specific compressor tools. Looks like a mish mash of extra parts to me assembled to sell as a kit
__________________
This post brought to you by Carl's Jr. |
#4
|
|||
|
|||
On the W201/W124 you really don't need spring compressors to work on the back. The front of the W124 definitely needs it but the front of the W201 doesn't. The spring is short.
__________________
CENSORED due to not family friendly words |
#5
|
|||
|
|||
Quote:
The Shocks need to come out first. Remove the calipers and hang then on the sway bar. lessens the chance of stretching the brake hose. Place floor jack under diff. Remove the 4 13mm bolts at the diff mount to body. Lower jack, and the springs just about fall out. Charlie
__________________
there were three HP ratings on the OM616... 1) Not much power 2) Even less power 3) Not nearly enough power!! 240D w/auto Anyone that thinks a 240D is slow drives too fast. 80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works |
#6
|
||||
|
||||
Quote:
it is doable to set them without the compressor, but it requires lowering the entire subframe to get the axles in the horizontal position prior to torqueing.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#7
|
|||
|
|||
Quote:
It is a KLANN 0025 made for SPX/Miller Tools for use by the dealerships on the Chrysler Cross Fire cars. It doesn't have the Size #2 plates because that car has Size # 1 springs both front and rear. The short shaft compressor is designed for more modern cars with 5-link rear suspensions where a longer shaft compressor won't work. At one time Mercedes spec'd a tool adapter that was a ring shaped collar that slid over the compressor before the bottom plate and effectively shortened the compressor's working length but that tool adapter has been NLA for years. That eBay seller is also forum member A set of upper and lower Size # 2 plates will cost about 250-300 Euro, a short shaft compressor by itself is about 500 Euro for new replacement parts. Last edited by Obamalamadingdong; 02-12-2014 at 02:43 PM. |
#8
|
|||
|
|||
Quote:
Quote:
Interesting, good to know!
__________________
This post brought to you by Carl's Jr. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|