|
|
|
#1
|
||||
|
||||
oM 603 injector line broke
I noticed my car was running routes in an idol so I looked underneath the hood and noticed that the third injector back the line was leaking at the injector, I try to tighten it but that wouldn't work so I took it off and look at it nothing seems to be wrong so I put it back on re tightened itand all I'm still felt loose inside the locking nut and then the line broke off where do I find another line is the dealership the only place that sells them other than the wrecking yards
__________________
Live simply so others can simply live 07 E350 sport Wife's Daily 01 E320 sport My Daily 00 C230 Kompressor Our back up (new Arrival) 87 300D Turbo my Daily for 8 yrs. Selling to neighbor 82 GMC Jimmy (K5) 6.2 Diesel (my Wheeler) 73 Roadrunner 340ci My very first car, still own it |
#2
|
|||
|
|||
Here's the good news and the bad news. You can get them from the dealer. The bad news is that they don't come prebent. And they're made of pretty heavy stuff, not easy to bend correctly. If you can find one in a junkyard, it would be better.
|
#3
|
|||
|
|||
What are the obvious signs associated with "running routes in an idol?"
__________________
When cryptography is outlawed, bayl bhgynjf jvyy unir cevinpl. |
#4
|
||||
|
||||
Auto Correct is a blessing and a curse
The lines are available, pre formed per cylinder route, from the dealer or the forum sponsor. I would also fix the root cause of the problem, broken hard line clips and supports. Steel injector lines W124.133 OM603.960 I6 300D Turbo 1986-87
__________________
The OM 642/722.9 powered family Still going strong 2014 ML350 Bluetec (wife's DD) 2013 E350 Bluetec (my DD) both my kids cars went to junkyard in 2023 2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles) 2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles) 1998 E300DT sold to TimFreeh 1987 300TD sold to vstech |
#5
|
|||
|
|||
Cut to length, but not prebent.
|
#6
|
||||
|
||||
When I had to replace a line on my OM606 the line I ordered from Pelican arrived pre-bent. Took 2 weeks since they had to special order it from MB.
Not sure if the OM603 is different.
__________________
The OM 642/722.9 powered family Still going strong 2014 ML350 Bluetec (wife's DD) 2013 E350 Bluetec (my DD) both my kids cars went to junkyard in 2023 2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles) 2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles) 1998 E300DT sold to TimFreeh 1987 300TD sold to vstech |
#7
|
|||
|
|||
The 60x lines haven't been available prebent for some time. They come cut to length, with fittings and flared ends. But they have to be bent to shape.
|
#8
|
||||
|
||||
Quote:
Sorry,,,Speak to text on my phone, must have been talking to quickly and then didnt notice the mistake, my apologies.........
__________________
Live simply so others can simply live 07 E350 sport Wife's Daily 01 E320 sport My Daily 00 C230 Kompressor Our back up (new Arrival) 87 300D Turbo my Daily for 8 yrs. Selling to neighbor 82 GMC Jimmy (K5) 6.2 Diesel (my Wheeler) 73 Roadrunner 340ci My very first car, still own it |
#9
|
||||
|
||||
Thanks to Everyone for the help, I will order one tomorow from one of the local MB dealers in town. Pre bent or not I can figure that out, and will also look at the retaining clips to see if any are broke, disconnected or missing and replace those as well.
__________________
Live simply so others can simply live 07 E350 sport Wife's Daily 01 E320 sport My Daily 00 C230 Kompressor Our back up (new Arrival) 87 300D Turbo my Daily for 8 yrs. Selling to neighbor 82 GMC Jimmy (K5) 6.2 Diesel (my Wheeler) 73 Roadrunner 340ci My very first car, still own it |
#10
|
|||
|
|||
I have an extra
Don't buy a new one! I have an extra that I will give you for the cost of shipping! Send me your address and I will send it to you.
Lee |
#11
|
||||
|
||||
Quote:
It was $44. not the world but not cheap, definitely would have taken you up on that though beings that I have other vehic's to drive in the mean time. Very much appreciate the offer. You are one of a hundred reasons why I belong to this forum. Good People. DARN.........., Ill ask him in the morn if its a hassle to send it back or not, he will be honest. If he says no hassle, Ill take you up on it. Once again thank you very much for the generosity.
__________________
Live simply so others can simply live 07 E350 sport Wife's Daily 01 E320 sport My Daily 00 C230 Kompressor Our back up (new Arrival) 87 300D Turbo my Daily for 8 yrs. Selling to neighbor 82 GMC Jimmy (K5) 6.2 Diesel (my Wheeler) 73 Roadrunner 340ci My very first car, still own it |
#12
|
|||
|
|||
Send me a PM however it goes. If you can send it back, then add your shipping address.
Glad to try and help. Lee |
#13
|
||||
|
||||
I bought one last year and it was prebent....
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42 |
#14
|
|||
|
|||
Pre Bent Lines - Yes....But get new clips too
Luckily the lines seem to be available pre bent. I replaced my 603.961 # 3 line a few months back from the local dealer... Leaked at the line / injector connecting nut...Worn line nipple from normal motor vibration...$63 / pre bent "plug and play".
As noted above....get some new "clips" and bracket rubber to minimize the vibration that wears the line nipples at the injector. They are very affordable...maybe $20 for the set.
__________________
1986 300SDL 440,xxx |
#15
|
|||
|
|||
I ordered one last year from the dealer and it was pre bent but they either sent the wrong one or they use the same part for more than one cylinder. I had to make the final bend and it "ain't " easy. I would love to have a strait one as a generic spare. You are F'D if you have far to go. Thank heavens it wasn't gas spilling all over my engine compartment.
__________________
1982 300D 135K 1986 300SDL 145K 1996 GMC Suburban 4x4 winter/tow vechicle 1989 Sunsation 24(ft) 454 65 MPH :fork_off: 1997 Aurora 82K |
Bookmarks |
|
|