Oil cooler lines hold-down bracket - Reinstall orientation help
I need to ask a favor....can someone take a pix or refer me to a link that shows the orientation of the two piece clamp that hold the oil cooler lines, under the power steering pump?
They were pulled off for an oil cooler line replacement and now I don't recall how they go back on! :embarasse |
I assume OM617 related question - if so is this any good?
http://www.peachparts.com/shopforum/diesel-discussion/273282-w123-300d-oil-cooler-lines.html |
Yes, 300SD. Sorry for not mentioning that.
I can see one of the two small clamp pieces in one of you images, but that LARGER bracket piece.....I don't know if I have that! Can someone confirm whether or not the larger bracket piece is also on the 126 body? I would think that it would be, but I don't recall that anything like that off and I don't see if lying around. |
Mine is also a non turbo 300D so that probably makes a difference too
|
Okay...figured out the top/front bracket, with the help of this picture.
http://www.peachparts.com/shopforum/attachments/diesel-discussion/58201d1219013608-help-needed-somebody-300sd-mercedes-300-sd-oil-lines-2.jpg I think the bottomside/middle bracket goes somewhere right next to the motor mount. As seen in this picture. http://dieselgiant.com/Oil_Cooler0012s.jpg |
All times are GMT -4. The time now is 11:18 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website