|
|
|
|
|
#1
06-08-2014, 12:06 PM
|
||||
|
||||
|
Does anyone want something like this?
Photos of the wood interior I am having done for my w201. These pieces are not complete because the high gloss coating still needs to be applied. the shifter knob was free hand carved and the glove box was also, he even made the little platic latch wooden which I was not expecting
 . Any type of wood is available in any color stain you want. Anything can be made/fabricated if you provide a drawing or picture of it if it is something that did not come on the car, ie, custom shifter knob or custom design for the center console or dash.
__________________
 1990 190E 3.0L 
|
|
#2
06-08-2014, 12:33 PM
|
||||
|
||||
|
Cost?
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!!  1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!
|
|
#3
06-08-2014, 12:43 PM
|
||||
|
||||
|
Cost varies depending on the type of wood you want and materials plus labor involved. I can say that a custom shifter knob is $250 flat, and that includes any type of wood and any color stain plus any design you want. In my case, I let him do his own design, I just wanted something more bulkier than the small knob that came with the car. The design was his idea, even adding the MB star at the top. I am very satisfied with it.
__________________
1990 190E 3.0L
|
 |
| Bookmarks |
|
|
Linear Mode
