I have some stuff that I won't use on the race truck that I'd be happy to hand to anyone who will come and get it. I have:

1) a complete 300SD driveshaft
2) a complete 240D driveshaft
3) Several driveshaft rubber discs (maybe all 4)
4) a 300SD radiator (condition unknown)
5) quite a bit of underhood wiring including switches, relays, etc.
6) 300SD head pipe (turbo to muffler)

There's probably some other junk, too. If no one wants these valuable artifacts I'll haul them off to the scrap metal folks so speak up if interested. The claimant(s) also gets a free guided tour of the S-10.

Dan

Let me add that there are NO body parts - those went to PnP a long time ago. That included a pretty decent, complete 240D body that I tried to give away on here but had zero interest. So there isn't a ton more than what I listed.

Dan

Do you have any manual transmission parts? I need the 3 arms that are on the transmission attached to the synchro stubs. I have a 1983 300D euro with 4speed manual and it has everything except those three arms. They attach to the rods that come from the shifter. I have the rods. The transmission is the cast iron unit with the aluminum bell housing and alum. tailshaft. Could also use that aluminum tailshaft section of the housing too, but not expecting anyone to part out an otherwise good tranny for that part. Thanks.

Sorry Mac - I used all the trans parts I had in my installation. Besides, I have the aluminum case 4 speed.

Dan

O.k thanks anyways, Dan.