Power Window Probs, '83 300TD
All windows work on some level, except the RF that will not roll down, only up.
I have cleaned the switches with contact cleaner and silicone grease. I have confirmed that I have continuity from the console plug to both connections at the RF motor, so I am really lost. Am I getting a false reading somehow? I have swapped in what I believe to be a good right side switch, no change. It might be nice to have someones' help to jumper connections at the plug to see if I can make it happen that way. I am open to any and all suggestions at this point. TIA |
Does anyone have a Clear wiring diagram for this then? I have one, but I can't read it very well.
|
Looks like another switch fixed the problem, finallllllly!
|
All times are GMT -4. The time now is 08:07 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website