Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-20-2014, 09:29 AM
Registered User
 
Join Date: Oct 2013
Posts: 50
300D NA Cruising RPM

Don't have a tach on my 1981 300d/NA. For ya'll that have a tach, what's my RPM cruising at 70MPH. 4spd auto.

Pat

Reply With Quote
  #2  
Old 09-20-2014, 09:42 AM
vstech's Avatar
DD MOD, HVAC,MCP,Mac,GMAC
 
Join Date: Mar 2006
Location: Mount Holly, NC
Posts: 26,841
Only way a na would have a tach would be if they installed one. Only the turbo cars got tachs however there are rpm calculators online. Put in your tire size and use 3.46 as your final drive ratio. Add 200rpm to the number the calculator spits out.

Likely around 4300rpm
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 190D 2.5Turbo
1987 190D 2.5-5SPEED!!!

1987 300TD
1987 300TD
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!
Reply With Quote
  #3  
Old 09-20-2014, 09:45 AM
Stretch's Avatar
...like a shield of steel
 
Join Date: Sep 2009
Location: Somewhere in the Netherlands
Posts: 14,461
It depends on the tyre size and whether you still have the correct 3.46 final drive ratio.

On standard size 14 inch wheels and say 195/65R14 tyres the revs are about 3500 at 70 mph

(Gear box top gear ratio - 4th - is 1:1)

Many calculators are available on ye olde interweb such as this one

Engine RPM Calculator
__________________
1992 W201 190E 1.8 171,000 km - Daily driver
1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone
1965 Land Rover Series 2a Station Wagon CIS recovery therapy!
1961 Volvo PV544 Bare metal rat rod-ish thing

I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior



Don't leave that there - I'll take it to bits!
Reply With Quote
  #4  
Old 09-20-2014, 12:17 PM
Registered User
 
Join Date: Oct 2013
Posts: 50
Much appreciated
Reply With Quote
  #5  
Old 09-21-2014, 02:57 PM
Registered User
 
Join Date: Oct 2012
Posts: 5,924
Too high for my tastes. It does not hurt the engine though. Changing the rear end and speedo head for a little taller rear end is not that bad. May even help fuel milage a little.

My 77 300d is a possibility as it seems powerful enough to take a reasonable rear end and speedometer change. I forget the next taller reasonable ratio available. In combination with a little larger tire size the differance should be noticeable if needed.

Funny car that one of ours with about half the radiator fins rotted out with age. It still did not overheat on the highway. I have a spare good rad to replace that one though.

There was a rise in coolant temperature going up serious grades that the heater running during them took care of well. It was a little hot in the cab that summer day though when doing it.

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page