|
|
|
#1
|
|||
|
|||
Left Turn Singing
The title seems strange, but I don't know how else to say it. Whenever I coast through a left turn while applying just a wee bit of power, something in the front right of the car sets up a harmonic.
If this were happening while braking, I would suspect wear sensors on the brakes, but its only happening under the circumstances above. Other ideas (to me) are bearings, and that's bothersome considering some of the other sudden bearing failure stories on here. Maybe its a belt or a bearing in a pulley that only acts up when the forces are just right? This set in about a week ago, and has become a little more noticeable lately. Anyone have suggestions of other things to check? Also, if I jack up the car, how do I check for bearing play? I know that rocking the tire will allow you to check ball joints and tierod ends, how do you check bearings?
__________________
1981 240 D in the Toronto Area Ivory with one black fender |
#2
|
||||
|
||||
Rocking the wheel won't show ball joint problems unless you are supporting the lca...
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#3
|
|||
|
|||
This is pretty close to how I've done it in the past - is it a bad procedure?
How to Check Ball Joints: 7 Steps - wikiHow
__________________
1981 240 D in the Toronto Area Ivory with one black fender |
#4
|
||||
|
||||
Quote:
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#5
|
|||
|
|||
Could be motor mounts. Can you rock the engine by hand?
|
Bookmarks |
|
|