|
|
|
#16
|
||||
|
||||
This might be useful. All the links I've seen so far say 30mm 12 side socket.
http://www.pelicanparts.com/techarticles/Mercedes-W124/95-SUSPEN-Axle_Replacement/95-SUSPEN-Axle_Replacement.htm
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out. Check here for compatibility, diagnostics, and availability! (4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!) 82 300SD 145k 89 420SEL 210k 89 560SEL 118k 90 300SE 262k RIP 5/25/2010 90 560SEL 154k 91 300D 2.5 Turbo. 241k 93 190E 3.0 235k 93 300E 195k |
#17
|
||||
|
||||
Quote:
I am not familiar with 202-124 parts compatibility.. it very well might..
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out. Check here for compatibility, diagnostics, and availability! (4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!) 82 300SD 145k 89 420SEL 210k 89 560SEL 118k 90 300SE 262k RIP 5/25/2010 90 560SEL 154k 91 300D 2.5 Turbo. 241k 93 190E 3.0 235k 93 300E 195k |
#18
|
||||
|
||||
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out. Check here for compatibility, diagnostics, and availability! (4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!) 82 300SD 145k 89 420SEL 210k 89 560SEL 118k 90 300SE 262k RIP 5/25/2010 90 560SEL 154k 91 300D 2.5 Turbo. 241k 93 190E 3.0 235k 93 300E 195k |
#19
|
|||
|
|||
Shop Sunex Tools 3/4-in Drive 30mm Shallow 12-Point Metric Impact Socket at Lowes.com
Will this work for the Hub socket ? |
#20
|
|||
|
|||
Once again Thanks James Dean Exatcly what i was looking for i just wasnt sure what parts would cross refrence and what would fit on what or what was diffrent This is exatcly what i had in mind DIY W124 Rear Wheel Carrier Removal (Rear Wheel Bearing Change)
and you linked that and that had Excatly the link i was needing !! Perfect !! Thanks Guys this should get me on track here im still hoping that this new " used " knuckle hub will work at least till i get all my ducks lined up so that way im not Rushed to get it done and i can do it Properly |
#21
|
||||
|
||||
Quote:
As for the castle nut, any 12 point 30mm socket will work. Be sure to unpeen the ridge of the nut first.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#22
|
||||
|
||||
And you will need a massive breaker bar and have eaten your Wheaties that morning.
The big nut is torqured to 240 N-m.
__________________
The OM 642/722.9 powered family Still going strong 2014 ML350 Bluetec (wife's DD) 2013 E350 Bluetec (my DD) both my kids cars went to junkyard in 2023 2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles) 2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles) 1998 E300DT sold to TimFreeh 1987 300TD sold to vstech |
#23
|
|||
|
|||
I was told this - " This Will Fit The Arms will not work but the Actual Knuckle will fit right up. But the linkages -Control Arms- are the same at the hub but running to the Frame they are configured diffrent. There are 5 Control Arms and 4 of the Control Arms are Diffrent "
|
#24
|
|||
|
|||
Dangnit Yep This will fit up but the hub is Diffrent in size So im back to just fixing it . Is it possible that my hub is Damaged if so is there anywhere to buy another one Since it is a Wagon ? VsTech You are a God Send !! you saved me alot of time by Bringing this up about the hub size i was able to get intouch with the seller of that used hub and they said you were Absouletly right !! Thanks a ton man save me from having to do Return shipping
|
#25
|
||||
|
||||
I have a spare wagon... I could rebuild my set and ship to you and you pay me and ship your when you install them on your wagon...
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#26
|
||||
|
||||
Lca's are wagon specific also... to accommodate the sls rams
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#27
|
|||
|
|||
Ok... someone refresh my memory...
At the first of this thread a ' Castle' nut... not really the proper word... but I can't spell the real one... I have one of those...and used it on my wagon rear axle... about fifteen years ago... But then pictures of a regular socket are shown and talked about like that is just fine for the job... Where did I use the special socket ...? Seems like it was used on something like a lock washer...a large one... from the inside... ?
__________________
1980 240d , chain elongation, cam marks reference: http://www.peachparts.com/shopforum/diesel-discussion/10414-help-i-need-check-stretch.html http://www.peachparts.com/shopforum/diesel-discussion/305365-9-degrees-chain-stretch.html evap fin cleaning: http://www.peachparts.com/shopforum/diesel-discussion/156207-photo-step-step-post-showing-w123-evaporator-removal-1983-240d-1982-300td.html?highlight=evaporator A/C thread http://www.peachparts.com/shopforum/diesel-discussion/297462-c-recommendations-mb-vehicles.html |
#28
|
|||
|
|||
Quote:
isnt the special Scoket just for the pulling of the hub ? but the Socket on the outside just use a Regualar 30 mm 12pt sockt ? |
#29
|
||||
|
||||
Quote:
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#30
|
||||
|
||||
Quote:
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
Bookmarks |
|
|