|
|
|
#1
|
|||
|
|||
W124 How is exterior TRIM attached to body panels ?
|
#2
|
||||
|
||||
Thanks for making these.
The doors work differently. There is a screw inside the trailing edge of the door. Once that is removed, the trim slides backwards off the retention posts. If you try to pry off a 124 door trim like how you show for the fender trim it will break the clips.
__________________
The OM 642/722.9 powered family Still going strong 2014 ML350 Bluetec (wife's DD) 2013 E350 Bluetec (my DD) both my kids cars went to junkyard in 2023 2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles) 2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles) 1998 E300DT sold to TimFreeh 1987 300TD sold to vstech |
#3
|
||||
|
||||
Dammmmn.... where is my 'like' button ??
__________________
1985 300D 198K sold 1982 300D 202K 1989 300E 125K 1992 940T "If you dont have time to do it safely, you dont have time to do it" "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|