|
|
|
#1
|
|||
|
|||
rebuild kit
Don't suppose anyone knows a supplier who has a wastegate rebuild kit for a om617 kkk26?
|
#2
|
||||
|
||||
I would be surprised if Mr. Bergsma didn't have one (search for it, Pelican blocks other retailers).
__________________
--------------------------------------------------------------- 1998 VW Cabrio 2001 Audi SomeRoad A/T (no air suspension) 2003 Audi DeadRoad M/T (no vroom, for later) 2002 Audi NoRoad A/T (nothing under the hood, being rebuilt) |
#3
|
||||
|
||||
If the spring is still strong enough to hold 12 psi, I would just get an aftermarket manual boost controller.
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42 |
#4
|
|||
|
|||
Put a aftermarket controller in with a boost guage.
Found it to be running too much boost,have tried adjustment in and out, controller open and closed but still pulls too much boost. Thinking it's stuck open. |
#5
|
|||
|
|||
Who's Mr.Bergsma?
|
#6
|
||||
|
||||
If its stuck open try moving it?
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42 |
#7
|
|||
|
|||
How?
I'm still looking for a internal digram to see how it works. I'm just a hobbyist with this as my daily driver. Did tap lightly around it to see if it would break free,any suggestions I'm very open to. Did notice during adjusting that the 3mm rod did get pulled back in but still made no difference in boost pressure. |
Bookmarks |
|
|