Is there a way to remove the fasteners that hold this grill on or do I need to drill them out?

Also anyone know what they are called or the P/N?
What about the boot? Can't seem to find that either and mine are a bit cracked.



Thanks all.

Two ways to remove it, pry the center section up and out, or with a drift drive it down and out.

The rivet is a two part affair.

Attached Thumbnails

     

__________________
83 SD

84 CD

Thanks.
Did you have a P/N?

They are reuse able. Like toomany said, drive out the centers
I use a small punch or small screwdriver. then with a small flat blade screwdriver gently lift them out.
The center section is a square peg, look for them when you lift out the grill.
Usually the one farthest from you will disappear. I think it drops down the rubber drain tube.

You can always get some from another 123.

A good deal of the plastic fasteners on these cars are like that.

Charlie


sent from my pos computer

__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works

Yes, part # 123 990 04 92.

Attached Thumbnails

 

__________________
83 SD

84 CD

The MBZ Classic Center in Irvine has them. They are different for the chrome grills and the black grills. Email Tom Hanson (thomas.hanson@mbusa.com)

Thanks all driving then through worked. Now to find the one center piece....

Can be tricky, good luck, keep us posted.

__________________
83 SD

84 CD