Help To Find Repair Boots
Need help finding where to buy split repair boots for 300SD. I replaced all 4 boots with Dorman's three years ago. Some leaked for awhile, now 1 is cut in half. Need fast repair. I know these split boots have problems, but it's better
than nothing. Thanks. |
No one has spoken specifically on the 300SD that I can remember. There was a thread on W123 Boots a month ago that had the number of a split boot for W123s that a few have used. I am at the library and don't have access to my notes.
Search diesel discussion for Productive Input On Split CV-Boots? that is the title of the thread. |
I haven't seen those zipped / split boots for years - they seem to be "gone" at the moment.
|
Here is the thread Diesel911 mentioned. was clear back on pg6.
http://www.peachparts.com/shopforum/diesel-discussion/371775-productive-input-split-cv-boots.html Charlie sent from my pos computer |
For a quick repair you can use self-fusing silicone tape (Ace hardware, etc). It is strong enough to temporarily seal a water hose, so no problem on a boot. I have used it when ball joint boots get ratty.
|
Any external repair to the CV Boot is going to require that you pack the CV Joint with CV Grease.
|
All times are GMT -4. The time now is 08:30 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website