|
|
|
#1
|
|||
|
|||
Passenger Heat
I am having a problem with no heat (hot air) coming out of the passenger floor vent. The actuator moves the flapper for the drivers side just fine and hot air comes out of the left and right side upper vents like it should and all other functions of the HVAC system work perfectly.
Is there a separate valve or actuator for the passengers side or could there be something internally in the airbox blocking the passenger floor vent? I searched and saw numerous posts for no heat on the drivers side, but nothing really mentioned on why nothing would be coming out of the passengers floor vent. Thanks! Chad 1995 E300D |
#2
|
||||
|
||||
Look through here. Index of /images/W124_dash
__________________
http://i284.photobucket.com/albums/l...aman/Fleet.jpg Peach Parts W124.128 User Group. 80 280SL 85 300SD 87 300TD 92 300D 2.5 Turbo 92 300TE 4Matic |
#3
|
||||
|
||||
Go here
Model 124 Maintenance Manual Index Look up chapter 83, that is the complete service manual for the climate control. The 124 climate control has one vacuum pod that opens the footwell flaps. It acts directly on the left side flap and there is a link rod over to the right side flap. I suspect the link rod has become detached.
__________________
The OM 642/722.9 powered family Still going strong 2014 ML350 Bluetec (wife's DD) 2013 E350 Bluetec (my DD) both my kids cars went to junkyard in 2023 2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles) 2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles) 1998 E300DT sold to TimFreeh 1987 300TD sold to vstech |
#4
|
|||
|
|||
Thanks y'all. I just got the car back in September and the maintenance records show that the AC Evaporator was replaced several years ago. Sounds like someone forgot to reconnect that or knocked it loose and didn't know it.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|