|
|
|
#1
|
||||
|
||||
84 123 CD no floor heat
Brrrrr, this season I found out there is no air blowing to the floor vents. All others work fine, plenty of heat.
Any ideas?
__________________
83 SD 84 CD |
#2
|
||||
|
||||
Vacuum pod or changeover valve. You can use a vacuum tester to see if the pod holds vacuum or move a changeover valve and see if the problem follows.
|
#3
|
|||
|
|||
The climate section of the manual was posted here several times (for 1983, but works). It details how the ~5 electric vacuum valves behind the push-button switch are supposed to actuate in the various cooling modes. Don't be confused that the manual terms each valve a "code", probably a translation issue. To change "mode" (heating vs cooling), you need to change the temperature setting on the blue-wht-red rotary wheel and/or push the defrost button.
__________________
1984 & 1985 CA 300D's 1964 & 65 Mopar's - Valiant, Dart, Newport 1996 & 2002 Chrysler minivans |
#4
|
||||
|
||||
Thanks guys, I was thinking changeover valve was the culprit.
I do have an FSM, just too cold to pull the dash, or do much of anything, just trying to get a handle on this issue.
__________________
83 SD 84 CD |
Bookmarks |
|
|