Hello all.
I am curious if anyone has the thread in nipple for connecting the fuel inlet and outlet. I removed the tank to be cleaned prior to remodeling our home and moving. The short of it is that I am now lacking these parts.

If anyone has a picture of the placement of the hoses connected to hard lines and tank, that would be great.

If anyone has the parts, I'd love to purchase them.

Thanks all.

[QUOTE=Renntag;3577791]Hello all.
I am curious if anyone has the thread in nipple for connecting the fuel inlet and outlet. I removed the tank to be cleaned prior to remodeling our home and moving. The short of it is that I am now lacking these parts.

If anyone has a picture of the placement of the hoses connected to hard lines and tank, that would be great.

If anyone has the parts, I'd love to purchase them.

Thanks all.[/QUOTE Might help if you had listed it as a w126 ,i had to find it from your profile.Iwill look for you .

This should help. I'm sure many of the members have a parts car with matches to your missing parts.

Attached Files

tankassembly.pdf (332.6 KB, 133 views)

__________________
84 300SD
85 380SE
83 528e
95 318ic

Thanks for the help. Sorry for the confusion. I decided to list the year and model for specific info, meaning, had I only listed W126, someone might ask for the year, etc. Any help is appreciated.

Thanks. Yes, it looks like supply and return hose/nipple assembly #69 and 70. The hose is crimped onto the fitting. Cutting off the crimp allows for a new hose to be attached. You know, assuming you don't LOSE the nipple/barb. .

__________________
83 300TD (need rear wiper assembly dead or alive)
84 300SD Daily driver
85 300TD almost 400k miles and driven daily.
98 E300D *sold
86 300SDL *sold and made flawless 10 hour journey to new home.

Can anyone confirm if the suppy and return hoses are the same at the bottom of the fuel tank? Worst case, I may purchase new replacement. Any help is appreciated. It looks like the fuel hose may cross to the SD and the W123.

__________________
83 300TD (need rear wiper assembly dead or alive)
84 300SD Daily driver
85 300TD almost 400k miles and driven daily.
98 E300D *sold
86 300SDL *sold and made flawless 10 hour journey to new home.

If anyone has these and can ship right away, I'd be very grateful. Please send a message.

Any help is appreciated. Thank you all.

__________________
83 300TD (need rear wiper assembly dead or alive)
84 300SD Daily driver
85 300TD almost 400k miles and driven daily.
98 E300D *sold
86 300SDL *sold and made flawless 10 hour journey to new home.

I have not yet ascertained if the inlet and outlet fittings are the same. I am holding out to find used level sensor and inlet outlet hoses/fittings. Please shoot me an email if you have these parts ! Thanks so much for the consideration.

Incase I am asked again, I am putting together an 86 300SDL, W126 for those that wish to ask. I am moving and need to get this together quickly. I am hoping someone has parts they wish to sell.

Again, thank you for assistance.

Rentag is this the parts you need? I dont have them, only the picture to help you find them.

Attached Thumbnails

 

I don't think they are interchangeable, check this parts site for sure.

__________________
83 SD

84 CD

Yes, that is exactly what I need. Rather than purchasing the new hose assemblies, I'd rather have an old cracked crappy one and remove the old hose to use the barb inside.

Thanks for the help.

At this point I need the two thread on hoses mentioned above (in any condition) and the fuel level sending unit.

Any help would be greatly appreciated. FYI, shipping to Va 22043.