What's the trick to keeping this trim part in?
The trim piece around my shifter console keeps popping up for some reason. This is not a photo of my car, but just a stock photo with the arrow pointing to the trim piece......
http://www.benzworld.org/forums/attachments/w124-e-ce-d-td-class/350603d1294409306-help-how-access-center-console-replace-img_2801-marked.jpg Does that trim piece have an official "top and bottom" to it, or can it just go in either way? It has 4 clips that protrude from it that grab onto something. Why would mine be popping out? I'm wondering if one of the plastic clip prongs broke off after I removed it. My car is a 1991 300d. |
Not sure if it is different on the W124 but on the W201, that piece is directional and has tabs that slide into slots. I had the same problem because the tabs were bent and were not sliding into their slots so I just bent them back the other way and was able to get it to go back in correctly.
|
That's right. It's a "Tab A into Slot B" kind of thing. Use a flashlight, look down around the shift quadrant, you'll see the 4 slots. Position the trim piece and carefully push it into place making sure each tabs goes into it's slot and doesn't bend around or over it.
|
All times are GMT -4. The time now is 03:12 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website