|
|
|
#1
|
|||
|
|||
603 mounts in w124
I'm trying to shove a 603 in a s123 (wagon) and I'm in the midst of fabricating some engine mounts. I'm pretty sure I know where I want the engine but I'm missing one measurement that I should have taken off of the parts car (87 300D) before I junked it.
I'd like the distance between the engine mount locations on the frame crossmember. Below is the measurement I'm looking for. And if you're wondering, no I am not using the w123 engine mounts. I'm adapting some w140 SDL arms and using the w124 style hydraulic engine mounts.
__________________
Onus probandi incumbit ei qui dicit, non ei qui negat I recondition w123/w126/w124/w140/r107/r129/ steering boxes! 1984 300D "Elsa" odo reset 6/2011 147k 1983 300TD "Mitzi" ~268k OM603 powered 1995 E300 "Adelheid" 262k [Sold] |
#2
|
|||
|
|||
I can get you that measurement Monday I have a parts car with no engine but it's at my friend's house 44 miles away
|
#3
|
|||
|
|||
The distance from the center of one hole to the center of the other hole is 20 and half inches if you have a question let me know
|
#4
|
|||
|
|||
Quote:
It seemed like the mounts were angled in to the engine slightly.
__________________
Onus probandi incumbit ei qui dicit, non ei qui negat I recondition w123/w126/w124/w140/r107/r129/ steering boxes! 1984 300D "Elsa" odo reset 6/2011 147k 1983 300TD "Mitzi" ~268k OM603 powered 1995 E300 "Adelheid" 262k [Sold] |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|