Synth. oil and Heat exchange
hi,
my 1983 MB 300D runs quite well, but can get hot 100C or a little above) when running on hot days with AC. Usual operating temp is more like 83-85. Ive heard that synth oil has better cooling behavior in autos, so the engines and cooling system requirements can be lowered. Is this true? Since I have an oil cooler on my car, if I used synth, would I notice much of a diffeence? Thanks JMH |
Stay away from synthetics on this car (Please don't let this start a dino versus syn debate - there are already enough of them). Go with a good quality diesel rated oil like Delo 400.
Check your coolant to water ratio. I have found 40% coolant, 60% water works pretty well along with a little water wetter. Make sure all the cooling components are working good. When was the last time the cooling system was flushed? I would be surprised if your oil cooler thermostat ever opens sending oil through that cooler. |
All times are GMT -4. The time now is 11:17 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website