RVT sealant for water pump replacement?
Hi
When replacing water pump, should I use RTV sealant in between the gasket? If so, what type RVT is good ? Is Permantex's "Ultra Gold" suitable for this application? Thank you Steve |
Yes, use the high temperature permatex stuff, it is orange. Only a thin layer, don't make it so thick it oozes out the sides.
|
Here is what I do with RTV sealants... I really clean the surfaces to be mated... then I put as thin a coat on each surface to be mated as I can... including both sides of the gasket... and let them cure.. like 12 hours... then when I am ready to put the item on I place another thin layer on all surfaces and quickly put them together... I use my finger to get it thin... and I just pull it down tight enough to be sure it is evenly contacted ... then I let that cure and then put the proper torque on the bolts... I have not had this method leak in 20 years... yes it is compulsive/obsessive...but when you have to take a bunch of stuff off just once you may decide the peace of mind is worth it...... if you study the reasons for RTV gasket failures you will recognize this as a method of avoiding them... :) Greg
|
All times are GMT -4. The time now is 06:25 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website