|
|
|
#1
|
|||
|
|||
Skid Plate?
So, I changed the oil today on the *new* '84D... and, there is a Skid Plate under the Oil Pan??? It looks *stock* i.e., very nicely/perfectly fitted. It has a precise cutout for the Oil Pan Plug. I've never seen this before???
anyone else have/seen this??? Thanks, dennis
__________________
'84 300D (211k) *New*... (Wife's) '85 300TD (174K) 10th Year... (Mine) '96 F-350 7.3L Dually (149K) Since New '85 300D (156K) ~~~Wrecked~~~ Damn it! (parts) '84 300D (176k) ~~~Wrecked~~~ Damn it! (parts) |
#2
|
||||
|
||||
Are you referring to the "noise encapsulation panel" under the engine? Usually they're tossed away when the engine is serviced for better access/convenience. It isn't all that common to find a car that old with them still present.
__________________
Current stable: 1995 E320 149K (Nancy) 1983 500SL 120K (SLoL) Black Sheep: 1985 524TD 167K (TotalDumpster™) Gone but not forgotten: 1986 300SDL (RIP) 1991 350SD 1991 560SEL 1990 560SEL 1986 500SEL Euro (Rusted to nothing at 47K!) |
#3
|
||||
|
||||
My five speed Euro TD came with one. its the first one I had seen.
__________________
1985 Euro 240D 5 spd 140K 1979 240D 5 spd, 40K on engine rebuild 1994 Dodge/Cummins, 5 spd, 121K 1964 Allice Chalmers D15 tractor 2014 Kubota L3800 tractor 1964 VW bug "Lifes too short to drive a boring car" |
#4
|
|||
|
|||
I've got the oil pan and radiator skid plates installed.
They are heavy duty and well made. You could bottom out with confidence. And some sparks!
__________________
1983 300CD Turbodiesel |
#5
|
|||
|
|||
Interesting... I'm removing it later this week so that I can clean the bottom of the engine. Once I get all leaks taken care of I'll probably put it back on... this will be my wife's car ...look at my sig below and you will see why!
Thanks! dennis
__________________
'84 300D (211k) *New*... (Wife's) '85 300TD (174K) 10th Year... (Mine) '96 F-350 7.3L Dually (149K) Since New '85 300D (156K) ~~~Wrecked~~~ Damn it! (parts) '84 300D (176k) ~~~Wrecked~~~ Damn it! (parts) |
#6
|
||||
|
||||
If it looks like this then it is a factory oil pan skid plate.
__________________
http://farm8.staticflickr.com/7271/7...144c3fc1dc.jpg |
#7
|
|||
|
|||
Mercedes calls them anti-noise panels (or encapsulation panels)...in practice they retain fluid drippings in older Benzes.
Still have mine on my 91.
__________________
14 E250 Bluetec 4Matic "Sinclair", Palladium Silver on Black, 156k miles 06 E320 CDI "Rutherford", Black on Tan, 173k mi, Stage 1 tune, tuned TCU 91 300D "Otis", Smoke Silver on Tan, 143k mi, wastegate conversion, ALDA delete 19 Honda CR-V EX 67k mi Fourteen other MB's owned and sold 1961 Very Tolerant Wife |
#8
|
|||
|
|||
Wish I had one of these. Guys usually load those up with oil pads then swap them out every oil change. No leaks.
__________________
'80 300SD - '83 240D - '00 E55 AMG - '02 G500 |
#9
|
|||
|
|||
Quote:
tell me more about this... I have the plate installed and a few drops of oil go through the concave opening where the hole is. I imagine any absorbent pads that go there would need to be secured somehow, zip ties, Velcro?
__________________
1983 300CD Turbodiesel |
#10
|
||||
|
||||
There is no noise encapsulation panel on an 84....is there?
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#11
|
|||
|
|||
Years ago there was a thread about the Dutch TD owner who took his wagon to Africa. (?). He installed the factory skid plate as I recalled and the factory lift it to raise the body. Anyone else remember that with the wagon covered in red dust?
__________________
1977 300d 70k--sold 08 1985 300TD 185k+ 1984 307d 126k--sold 8/03 1985 409d 65k--sold 06 1984 300SD 315k--daughter's car 1979 300SD 122k--sold 2/11 1999 Fuso FG Expedition Camper 1993 GMC Sierra 6.5 TD 4x4 1982 Bluebird Wanderlodge CAT 3208--Sold 2/13 |
#12
|
||||
|
||||
Quote:
https://www.flickr.com/photos/300tdorg/albums/72157609267375263
__________________
http://farm8.staticflickr.com/7271/7...144c3fc1dc.jpg |
#13
|
||||
|
||||
No but my white 280e euro came with a skid plate like the one pictured and tall springs kit. I believe it also had 15" wheels and tires from the factory too. It was outfitted for the American Ralley of 84 which ended up being cancelled due to unrest in some of the key countries it had to run through. It was to have started in LA and ran to Alaska then to the tip of south America and back to LA.
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#14
|
|||
|
|||
This guy Jurgen is a bad-ass!
__________________
1983 300CD Turbodiesel |
#15
|
|||
|
|||
Quote:
Looks like this.
__________________
'80 300SD - '83 240D - '00 E55 AMG - '02 G500 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|