"bank vault" door thunks
 

hi folks, my driver's door (with manual window) has never sounded particularly decisive on closing. i found that the spot weld had gone on the window channel support bracket and replaced it with two little allen bolts. that's better, but it still sounds like of rattly, even with a new seal. i don't see any loose bolts, so i'm asking here: what else should i look for in the door to tighten or bond in some fashion?

This may be able to get fixed by replacing the door stops. Check out the link below to a DIY from our site, it may help you address the issue. Hope this helps!

Mercedes-Benz W123 Door Stop Replacement | W123 (1977-1985) | Pelican Parts DIY Maintenance Article


-Dmitry