Where can I get vane bracket bolts for OM642 GT2056V turbo
 

My inlet pipe fell apart and chewed up my compressor wheel on my 08 ML320 CDI. In rebuilding the turbo all 5 of the vane bracket bolts broke. I can't seem to find any place that sells these bolts. Before going to the hardware store and making something work does anybody know where I can get these little torx head bolts?

Hello and welcome to the forum! If our members don't chime in or have a source; feel free to give us a call at 888-280-7799 and one of our MB part specialists may be able to help or suggest an alternative. Hope this helps and best of luck!

Do you have a Fastenal store nearby?

Also just FYI the big bolts holding the turbo to the oil tower are stretch to yield, so they are one-use bolts. Factory torque spec is something in the high double digits +90 degrees. That is a dead giveaway its a stretch to yield bolt.

I do unfortunately I don't have any good bolts to take in with me to show them what I'm looking for. If I had dimensions I could find them and order them but was hoping to find replacement bolts. I can't imagine I'm the only one that has broken them off.