|
|
|
#1
|
||||
|
||||
W124 Sunroof Seal too Big?
Hey Guys,
I'm working on replacing the sunroof seal on my W124. The original is pretty hard and has a lot of paint on it from previous paint jobs. I've got a new MB one 124 780 00 98 for my 91 300D. I'm having a hell of a time getting it all to fit. Its almost like the long portions are 1-3 inches too long. Has anyone run into this before? Maybe I'm missing something? --Kris
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out. Check here for compatibility, diagnostics, and availability! (4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!) 82 300SD 145k 89 420SEL 210k 89 560SEL 118k 90 300SE 262k RIP 5/25/2010 90 560SEL 154k 91 300D 2.5 Turbo. 241k 93 190E 3.0 235k 93 300E 195k |
#2
|
|||
|
|||
Yeah. Had the same issue on my W123. I just trimmed to fit. Your results may vary.
|
#3
|
||||
|
||||
My seal is one big loop. The W123's looks to be individual pieces.
I could break open the loop and trim it a bit hmm.
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out. Check here for compatibility, diagnostics, and availability! (4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!) 82 300SD 145k 89 420SEL 210k 89 560SEL 118k 90 300SE 262k RIP 5/25/2010 90 560SEL 154k 91 300D 2.5 Turbo. 241k 93 190E 3.0 235k 93 300E 195k |
#4
|
||||
|
||||
I went through this with the SDL. It seemed like the entire seal was something like 6" too long!
What I wound up doing was pressing the corner pieces in place, leaving an even "loop" of extra material on each side. I then divided up the "loop" evenly along each side, then pressed it all in place. Close the sunroof and leave it for a day or two and it should be ok. Until the new seal compresses, the sunroof may drag on it a little bit and need some "help" to fully close. It took mine about 2 weeks in the sun before it worked properly, but been fine since. YMMV...
__________________
Current stable: 1995 E320 149K (Nancy) 1983 500SL 120K (SLoL) Black Sheep: 1985 524TD 167K (TotalDumpster™) Gone but not forgotten: 1986 300SDL (RIP) 1991 350SD 1991 560SEL 1990 560SEL 1986 500SEL Euro (Rusted to nothing at 47K!) |
#5
|
||||
|
||||
Here's where I'm at right now. I put the corners in but the only excess appears to be in the back..
The profile of the seal changes at the corners so I can't really offset it. The sheet metal area isn't enough to accommodate the bigger corner profile. Pics: https://jamesdean59.smugmug.com/Car-Photos/W124-Sunroof-Seal/
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out. Check here for compatibility, diagnostics, and availability! (4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!) 82 300SD 145k 89 420SEL 210k 89 560SEL 118k 90 300SE 262k RIP 5/25/2010 90 560SEL 154k 91 300D 2.5 Turbo. 241k 93 190E 3.0 235k 93 300E 195k |
Bookmarks |
|
|