Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

LinkBack Thread Tools Display Modes
Old 05-31-2002, 02:28 PM
Posts: n/a
Unhappy change over switch????w115

Im trying to get the a/c system going in my 75 240d.....
A/C blower only works if I maunaly ground it....
Any clue on whats up...
Wiring diagram shows a change over switch.. but I cant find it..
Blower resistor maybe??? but fan does not work on High, so
it should not be it....

Reply With Quote
Old 05-31-2002, 07:17 PM
Registered User
Join Date: May 2002
Location: Central Oregon
Posts: 1,004
Look under the dash (just over the throttle pedal) against the heater/ac unit on the drivers side you will see a push rod that is tied to a vacuum canister and controls the internal a/c vents.
That rod has a metal plate fixed on it and when the vacuum is (off, I think) correct the rod is pulled up by the vacuum actuator and the plate comes off the switch and allows the heater fan to come on and turns off the a/c fan. With the plate engaging the switch the a/c fan should run and not the heater fan.

If I didn't explain it well enough let me know and I can take a photo of the switch and location.
Reply With Quote
Old 05-31-2002, 08:05 PM
Posts: n/a
heres the story.... ITS GONE.... that right, not there!!! just a conector with some jumpers in it.....
I moved the jumpers into the right holes by using wire diagrams and a/c blower WORKS!!!!!!!
Heater does not.... but thats a problem for the fall!
Going to take switch off of my parts car and see if it works!!!
Thanks for your help!!

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 08:40 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page