|
|
|
|
|
#1
01-23-2018, 10:29 PM
|
|||
|
|||
|
OM603coolant leak just near turbo
Found coolant leak on pass side near turbo. there is water pump in the front, and just rear of pump, some kind housing with hose goes in, I guess it's thermostat housing. It looks like has two parts, one part mount to the engine side, and before that another one and it's leaking. I can't find any gasket for this part. Any ideas?
Thanks
__________________
91' MB 350 SDL, with 961 engine and #14 valve head 09' ML320 Bluetec 
|
|
#2
01-23-2018, 10:40 PM
|
||||
|
||||
|
Quote:
Check out post #12 OM603 T-stat change I would clean everything and recheck to be sure.
__________________
1998 Ford Escort ZX2 5 speed - 279,000 miles My Daily 1992 Mercedes 300D 2.5 202,000 - Pure junk 2000 Mercedes E320 Black - 136,000 miles - Needs repair Don't forget to grease the screw and threads on the spring compressor.
|
|
#3
01-23-2018, 10:51 PM
|
|||
|
|||
|
yes that is one. Is t pain? I looked it seems to be it needs to remove intake boot, and should be access. Any gasket goes there ?
http://www.peachparts.com/shopforum/attachments/diesel-discussion/26682d1117497091-om603-t-stat-change-thermostat.jpg
__________________
91' MB 350 SDL, with 961 engine and #14 valve head 09' ML320 Bluetec
|
|
#4
01-23-2018, 10:59 PM
|
||||
|
||||
|
The gasket should come with the thermostat. It's just a rubber thing that looks like an O-ring.
__________________
Current stable: 1995 E320 149K (Nancy) 1983 500SL 120K (SLoL) Black Sheep: 1985 524TD 167K (TotalDumpster™) Gone but not forgotten: 1986 300SDL (RIP) 1991 350SD 1991 560SEL 1990 560SEL 1986 500SEL Euro (Rusted to nothing at 47K!)
|
|
#5
01-23-2018, 11:10 PM
|
||||
|
||||
|
One member states replacing it is very easy.
__________________
1998 Ford Escort ZX2 5 speed - 279,000 miles My Daily 1992 Mercedes 300D 2.5 202,000 - Pure junk 2000 Mercedes E320 Black - 136,000 miles - Needs repair Don't forget to grease the screw and threads on the spring compressor.
|
|
#6
01-27-2018, 04:34 PM
|
|||
|
|||
|
Unfortunately , it's not a thermostat seal, it's whole bracket seal.
Anyone have do without lifting a car? Also looking for p/n for the bracket seal. Help will be nice Thanks
__________________
91' MB 350 SDL, with 961 engine and #14 valve head 09' ML320 Bluetec
|
|
#7
01-27-2018, 06:08 PM
|
||||
|
||||
|
Assuming you're talking about Part #315 in the drawing? The document you linked is the instructions to R&R that part. The forum sponsor has the gasket here: https://www.pelicanparts.com/More_Info/6062010180.htm?pn=606-201-01-80-M17&SVSVSI=3342#
__________________
Current stable: 1995 E320 149K (Nancy) 1983 500SL 120K (SLoL) Black Sheep: 1985 524TD 167K (TotalDumpster™) Gone but not forgotten: 1986 300SDL (RIP) 1991 350SD 1991 560SEL 1990 560SEL 1986 500SEL Euro (Rusted to nothing at 47K!)
|
 |
| Bookmarks |
|
|
Linear Mode
