Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #16  
Old 01-24-2018, 07:13 PM
Fulcrum525's Avatar
Sing Blue Silver
 
Join Date: May 2008
Location: CT
Posts: 2,117
My loose pump and the one I have on my spare engine both have the same part numbers of 0 440 007 017 FP/KG22 M 101 and have 7mm diameter shafts. The last time I pulled the pump on my truck I remember that the shaft different and was tapered towards the pump side. (I won't know for certain until I remove it again)

Loose pump with shaft of 7mm




Pump on spare engine (Shaft diameter is the same)


Mounted on engine with Euro 300D injection pump (not 100% certain that shaft is the same)
https://imgur.com/3NYq04F

Also here is the only picture of could find of the DKG301 and the supposedly for a M-pump compatible DKG128 kit
Refreshing the fuel pump on an OM617 (European spec non turbo)


Last edited by Fulcrum525; 01-24-2018 at 08:33 PM.
Reply With Quote
  #17  
Old 01-25-2018, 11:54 AM
Registered User
 
Join Date: Jan 2018
Posts: 11
Blowing up the pic of the DKG 128 Kit, I don't see the gasket for the LP to the IP? SO after a little looking I found this on ebay

https://www.ebay.com/itm/Bosch-junta-Kit-Dgk-128-DGK128-Diesel-Bomba-de-inyeccion-/132266150153?_ul=AR&nma=true&si=W9FwcXLZA2LmEg8uPmQRZ55NuIg%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557


It looks like the DKG128 is the injection pump reseal kit? In the ebay pic it looks like there is a 3 bolt LP gasket, however it could have the 2 bolt and just be a complete kit??

I found another pic of a "kit" that look like someone put together.
Attached Thumbnails
Sourcing parts for 617NA fuel pump rebuild-bosch-reseal.jpg  

Last edited by Redrock240g; 01-25-2018 at 12:11 PM.
Reply With Quote
  #18  
Old 01-25-2018, 03:17 PM
Fulcrum525's Avatar
Sing Blue Silver
 
Join Date: May 2008
Location: CT
Posts: 2,117
Quote:
Originally Posted by Redrock240g View Post
Blowing up the pic of the DKG 128 Kit, I don't see the gasket for the LP to the IP? SO after a little looking I found this on ebay

https://www.ebay.com/itm/Bosch-junta-Kit-Dgk-128-DGK128-Diesel-Bomba-de-inyeccion-/132266150153?_ul=AR&nma=true&si=W9FwcXLZA2LmEg8uPmQRZ55NuIg%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557


It looks like the DKG128 is the injection pump reseal kit? In the ebay pic it looks like there is a 3 bolt LP gasket, however it could have the 2 bolt and just be a complete kit??

I found another pic of a "kit" that look like someone put together.
Where did you find the picture on that 2nd kit? That looks like it has everything assuming that small o-ring is for the shaft. I also have a call into a local Bosch injection shop. He actually mentioned the DKG301 but then stated that he would probably have to pull the parts individually which makes sense. He actually asked if I needed the shaft as well....I'll be surprised if they stock those as well.
Reply With Quote
  #19  
Old 01-25-2018, 08:06 PM
Registered User
 
Join Date: Jan 2018
Posts: 11
Quote:
Originally Posted by Fulcrum525 View Post
Where did you find the picture on that 2nd kit? That looks like it has everything assuming that small o-ring is for the shaft. I also have a call into a local Bosch injection shop. He actually mentioned the DKG301 but then stated that he would probably have to pull the parts individually which makes sense. He actually asked if I needed the shaft as well....I'll be surprised if they stock those as well.
I found the second pic on ebay.de

https://www.ebay.de/itm/REPARATUR-SATZ-FUR-EINSPRITZPUMPE-MERCEDES-W123-OM-615-616-MOTOR-DICHTUNGEN/321895995872?hash=item4af27f19e0:g:dwMAAOSw14xWIkhv

If your guy can pull the LP parts ask him to pull an extra set and I will call.
Reply With Quote
  #20  
Old 02-07-2018, 07:38 PM
Registered User
 
Join Date: Jan 2018
Posts: 11
Got great help from Seattle injector on these parts. They also had the two bolt gasket between the LP and the IP. If you need anything they are happy to help.
Attached Files
File Type: pdf img-180207173713.pdf (403.6 KB, 64 views)
File Type: pdf img-180207173813.pdf (559.4 KB, 60 views)

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:04 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page