|
|
|
#1
|
|||
|
|||
87 300sdl motor mounts
My indie replaced motor mounts (good) but the shields are bent and now not aligned (or installed?) correctly. ANYONE have any pictures of correct orientation from top - drivers side definitely. Need to correct, as from what I see it's rubbing on either mount or frame.
Thanks-did search and did not find any on internet. M |
#2
|
|||
|
|||
What is the chassis code?
I can look at diagrams on epc My coupe is 123.153 No idea what your sdl is though |
#3
|
|||
|
|||
126.125 is code, thx
|
#4
|
|||
|
|||
Heat shield part # is 126 241 0434 right
0334 left Angles up towards rear |
#5
|
|||
|
|||
A google search with the part numbers will pull up diagrams for reference
|
#6
|
|||
|
|||
thanks for the info, had part no and diagram already. Hoping that someone can take picture so that I can show mechanic what it's supposed to look like installed.
|
#7
|
|||
|
|||
should look like this with angled portion facing the rear
__________________
1983 300CD Turbodiesel |
#8
|
|||
|
|||
Thank You!!!
|
Bookmarks |
|
|