|
|
|
#1
|
|||
|
|||
mystery steering pump bolt?
Just finishing up doing a head gasket on the 300SD and the group of bolts
I had labeled for the power steering pump had one with a bracket on it. Where does this go? Everything is back together except the power steering pump, cruise control and valve cover. Losing my memory in my old age [ATTACH] Thanks in advance, Jeff
__________________
1984 300SD 300,000 miles--two tank WVO setup 2.88 diff & 500SEL anti-squat rear end |
#2
|
|||
|
|||
second photo
__________________
1984 300SD 300,000 miles--two tank WVO setup 2.88 diff & 500SEL anti-squat rear end |
#3
|
||||
|
||||
It looks like the tab that the glow plug wire harness is attached to with the factory cable tie. I think it goes on the rear bolt of the PS pump casting, and the harness is routed behind said casting.
__________________
All Diesel Fleet 1985 R107 300SLD TURBODIESEL 2005 E320 CDI (daily) LOTS of parts for sale! EGR block kit http://www.peachparts.com/shopforum/diesel-discussion/355250-sale-egr-delete-block-off-plate-kit.html 1985 CA emissions 617 owners- You Need This! Sanden style A/C Compressor Mounting Kit for your 616/ 617 For Sale + Install Inst. Sanden Instalation Guide (post 11): http://www.peachparts.com/shopforum/diesel-discussion/367883-sanden-retrofit-installation-guide.html |
#4
|
|||
|
|||
Thanks Rich.
Now that you mention it, I seem to remember snipping a cable tie down there. Jeff
__________________
1984 300SD 300,000 miles--two tank WVO setup 2.88 diff & 500SEL anti-squat rear end |
Bookmarks |
|
|