|
|
|
|
|
#1
12-17-2018, 02:36 PM
|
|||
|
|||
|
Lock cylinders 81 240d
Just got one key with my 81 240d, works in the ignition and trunk but not in the two front doors or glove box... Kinda weird... Will the cylinder from the trunk fit in the door handle???
Sent from my SM-G892A using Tapatalk
__________________
Brad Bunch of old metal, trying to keep it on the road.... 
|
|
#2
12-17-2018, 02:59 PM
|
||||
|
||||
|
I was thinking valet key for a minute, but that combination makes no sense for a valet key. I think the lock cylinders are froze up.
__________________
CC: NSA All things are burning, know this and be released. 82 Benz 240 D, Kuan Yin 12 Ford Escape 4wd You're four times It's hard to more likely to concentrate on have an accident two things when you're on at the same time. a cell phone. www.kiva.org It's not like there's anything wrong with feeling good, is there?
|
|
#3
12-17-2018, 03:16 PM
|
||||
|
||||
|
What Moon161 said is likely.
You might question the former owner if available. I bought some used door, trunk and ignition locks on eBay. The Ignition Tumbler and the Trunk Lock are easy to change compared to the Door locks. It could be someone replaced the Ignition Tumbler and Trunk Lock and left the doors alone. Someone has a thread on taking the lock tumbler apart so they can be re-keyed. Have you done any spraying of penetrating oil inside of the Door Lock Slots to see if they will loosen up? You would need to take off the door panels to get at the locking system back sides. Before removing the Door Panels you need to carefully pry out the plastic shield/cup that is covering a single small screw. It is behind where you stick your fingers to pull the lever to open the door.
__________________
84 300D, 82 Volvo 244Gl Diesel
|
|
#4
12-17-2018, 03:16 PM
|
|||
|
|||
|
I'm hoping so... Going to try some WD-40 in them and let it sit
Sent from my SM-G892A using Tapatalk
__________________
Brad Bunch of old metal, trying to keep it on the road....
|
|
#5
12-17-2018, 03:21 PM
|
||||
|
||||
|
Before removing the Door Panels you need to carefully pry out the plastic shield/cup that is covering a single small screw. It is behind where you stick your fingers to pull the lever to open the door.
__________________
84 300D, 82 Volvo 244Gl Diesel
|
|
#6
12-17-2018, 03:27 PM
|
|||
|
|||
|
Yes sir, already had the panel off troubleshooting the vac lock system... Which works now
 Just gave them a shot of PB Blaster!! Sent from my SM-G892A using Tapatalk
__________________
Brad Bunch of old metal, trying to keep it on the road....
|
|
#7
12-18-2018, 05:45 PM
|
|||
|
|||
|
Still not moving... Called the local dealer, $41.00 for a single key to fit the doors...
Sent from my SM-G892A using Tapatalk
__________________
Brad Bunch of old metal, trying to keep it on the road....
|
|
#8
12-18-2018, 05:51 PM
|
||||
|
||||
|
Quote:
Call the mercedes classic center. Keys are about $20 from them.
__________________
CC: NSA All things are burning, know this and be released. 82 Benz 240 D, Kuan Yin 12 Ford Escape 4wd You're four times It's hard to more likely to concentrate on have an accident two things when you're on at the same time. a cell phone. www.kiva.org It's not like there's anything wrong with feeling good, is there?
|
|
#9
12-18-2018, 06:26 PM
|
|||
|
|||
|
Quote:
Sent from my SM-G892A using Tapatalk
__________________
Brad Bunch of old metal, trying to keep it on the road....
|
 |
| Bookmarks |
|
|
Linear Mode
