|
|
|
#1
|
|||
|
|||
Can anyone think of a use for 126 interior parts
I'm cleaning out and have some door panels, door gaskets and B-pillar trim. The panels are decent but have some flaws like broken plastic at the top. Door gaskets all have the cloth torn &/or are dirty but the rubber is decent. The B-pillar trim needs to be recovered. Colors are Palomino and grey tex.
I hate to throw stuff out but this is in the way. Does anyone have any ideas or reason they should be saved other than the fact that there are fewer cars in the yards?
__________________
85SD 240K & stopped counting painted, putting bac together. 84SD 180,000. sold to a neighbor and member here but I forget his handle. The 84 is much improved from when I had it. 85TD beginning to repair to DD status. Lots of stuff to do. |
#2
|
|||
|
|||
Let's just face it and admit it, that stuff as well as all our cars is obsolete junk
__________________
'83 SD, 2x '85 SD You are entitled to your own opinions, you are not entitled to your own facts. |
#3
|
|||
|
|||
I picked and matched a good set of door panels then scrubbed them with ammonia and shot a few coats of SEM vinyl paint on them. They pass the smell test no matter where you stick your nose.
Imo, it's they are cracked there is no need to attempt to fix them. Even the good one are going to need to be refurbished so I tossed those with flaws other than fading into the trash. I wouldn't worry about saving any if they were anymore damaged than faded.
__________________
84 300SD 85 380SE 83 528e 95 318ic |
#4
|
|||
|
|||
Would you have a driver foot rest in Palomino for a 126 ?
Thx greazer2b |
Bookmarks |
|
|