|
|
|
#16
|
|||
|
|||
Gravity bleed works well.
Trick is to use plastic film between the resevoir and the cap just before closing the bleeder valve. On 'Stormcloud', I let a few ounces of DOT 5 run through each line to clean out the water and rust that invariably settles into the bottom of the brake caliper. This was done prior to the brake upgrade.W116 brake upgrade
__________________
78 W116 300SD 'Desert Rose' new as of 01/26/2014 79 W116 300SD 'Stormcloud' RIP 04/11/2022 |
#17
|
||||
|
||||
Caliper Interchange
I don't think he was talking about ATE Vs. Bendix.....
"Even amongst W123 sedans, calipers were not "the same." ".
__________________
-Nate 1982 240D 408,XXX miles Ignorance is the mother of suspicion and fear is the father I did then what I knew how to do ~ now that I know better I do better |
#18
|
||||
|
||||
IMHO Same is not important, interchangeability is.
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#19
|
||||
|
||||
Caliper Interchangeability
Agreed .
Over my career I've encountered many poor braking and oft times dangerous vehicles that had mis matching brake parts installed side to side . I'll never have an Ate on one axle and a Bendix on t'other . Yes, it'll all bolt up and bleed out, no, they're not the same .
__________________
-Nate 1982 240D 408,XXX miles Ignorance is the mother of suspicion and fear is the father I did then what I knew how to do ~ now that I know better I do better |
#20
|
||||
|
||||
I've done it. No problem. As long as the pistons are same diameter they will provide equal braking.
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#21
|
||||
|
||||
Understood but it's bad practice in general .
__________________
-Nate 1982 240D 408,XXX miles Ignorance is the mother of suspicion and fear is the father I did then what I knew how to do ~ now that I know better I do better |
Bookmarks |
|
|