|
|
|
#1
|
||||
|
||||
OM602 Head Bolt Quantity?
How many of each length head bolts does the 602 use? Please and thanks!
__________________
'82 300CD "Pearl", the very first turbo diesel 123 coupe Totaled 11/23/18, rebuild in progress. '85 300TD, "Artemis". '78 300D euro, "Ol' Red", mostly retired. '85 300D, "Gandalf". |
#2
|
||||
|
||||
The major vendors will have the count for each if you look it up whether its peachparts or the haus of autos in arizona.
What I found was that: 1) All or nearly all of the bolts from the head of my om602 2.5 met the FSM guidelines for re-use. 2) I mail ordered a set anyway, and when they came I found that the new bolts had a wider head than the old ones and about all bolts that go into the exterior of the head (about half) wouldn't fit into the close counterbore that the old ones did, so I returned them and talked to the vendor QA. 3) I drove to the MB of buffalo parts counter and ordered a set. They came in, same deal. 4) I bought a cheap bench grinder and and ground the heads down a touch in diameter and finished the job. 5) Did I mention that all or nearly all bolts met criteria for reuse? WTF was I thinking?
__________________
CC: NSA All things are burning, know this and be released. 82 Benz 240 D, Kuan Yin 12 Ford Escape 4wd You're four times It's hard to more likely to concentrate on have an accident two things when you're on at the same time. a cell phone. www.kiva.org It's not like there's anything wrong with feeling good, is there? Last edited by moon161; 06-04-2019 at 09:30 AM. |
#3
|
||||
|
||||
__________________
CC: NSA All things are burning, know this and be released. 82 Benz 240 D, Kuan Yin 12 Ford Escape 4wd You're four times It's hard to more likely to concentrate on have an accident two things when you're on at the same time. a cell phone. www.kiva.org It's not like there's anything wrong with feeling good, is there? |
Bookmarks |
|
|