Hi!

I have decided to renew the ac-system in my 300 tdt-85 (euro).

All parts are now mounted except the compressor thougt it seems very troublesome to find a fitting one.

The ones I’ve found has a different attachement for the pipes and my mecanic is convinced that a mounting will render leaks. This because the two attachment-ports are unsimilar deep and that no o-rings or washers will manage to hold back a leak.

Greatful for good advices in this issue.

My Old compressor had the Old o-ring ports and the new ones all seems to have bigger recesses and no withcoming o-rings or washers.

I will try to attach photos!

Best regards!

Lj74
Sweden

What do I need to get this together (old pipes and new compressor)?

Regards!

L

Attached Thumbnails

   

There is an AC Delco p/n for the seals you need. When I get back in the shop over the next day or two I'll see if I have a set that I'll grab p/n off of and send. The correct seals are out there.

__________________
Jim

Here you go:

seal washers

__________________
Jim

Great! Big Thank´s!

L