|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Which adhesive for reglueing floor mat carpeting and backing pad?
Greetings good M-B people.
Recently, I have had the original front and rear floor mats (carpeting + backing pad) out of my 1985 300D. After 35 years, the adhesive securing one to the other has weakened (see attached picture for an example). Searching the archives here, I have found the following 3 potential adhesive candidates for reglueing the carpeting and backing pads: 1. Weldwood Contact Cement 2. E6000 Industrial Adhesive 3. 3M Super 77 I've also considered using Liquid Nails Small Projects & Repairs Adhesive. If anyone has experience with the above products, positive or negative, I would appreciate your sharing the results. Also, if anyone has another product to recommend for this work, I would appreciate reading about that, too. Thank you- |
#2
|
||||
|
||||
depending on climate,get something healthy to breathe
__________________
1999 w140, quit voting to old, and to old to fight, a god damned veteran |
#3
|
|||
|
|||
so far so good
A little over 2 years ago now, I used E6000 on my front mats because the original glue had disintegrated. It was easy to apply and so far, everything is still held together pretty good.
|
#4
|
|||
|
|||
https://www.liquidnails.com/products/fuze-it-all-surface-adhesive#platform-statement
Though I haven't used this in precisely your application it sticks phenomenally, durable, flexible and cheaper per volume than E6000. Just read the reviews. Also it does not stink - a plus inside the car.
__________________
'83 SD, 2x '85 SD You are entitled to your own opinions, you are not entitled to your own facts. |
#5
|
|||
|
|||
Quote:
|
#6
|
|||
|
|||
I have 06 W211 on which the floor mats have foam backing and has foam dried out and it is no longer keeping the mats from sliding. I was wondering if I could spray FlexSeal or something thing else to restore them. Hate to spend $$$ on a new set.
__________________
06 MB E320 CDI 123k miles 14 Sienna (wife's DD) 36k miles 11 GL350 Bluetec 136k (Sold) 96 E300; 292k+ miles (Donated) 11 Sprinter 22K+ miles (Sold) |
#7
|
||||
|
||||
3M 77 is more of an arts and crafts type adhesive. For auto applications I use 3M 90 adhesive (green can). It is most like the commercial contact cement upholstery shops use.
__________________
All Diesel Fleet 1985 R107 300SLD TURBODIESEL 2005 E320 CDI (daily) LOTS of parts for sale! EGR block kit http://www.peachparts.com/shopforum/diesel-discussion/355250-sale-egr-delete-block-off-plate-kit.html 1985 CA emissions 617 owners- You Need This! Sanden style A/C Compressor Mounting Kit for your 616/ 617 For Sale + Install Inst. Sanden Instalation Guide (post 11): http://www.peachparts.com/shopforum/diesel-discussion/367883-sanden-retrofit-installation-guide.html |
#8
|
||||
|
||||
Quote:
J.G. |
#9
|
||||
|
||||
Quote:
I wish I'd had this rec before I redid the entire car using dap!
__________________
1985 300D Surfblau "Blueberry" 250K R.I.P 1984 300CD Manila Beige "The Banana" 238K R.I.P 1984 300TD Cypress Green "Olive" 390K (M.I.A.) 1982 300D Orient Red "Steak" 195K 1985 Euro 300TD Lapis Blue “Pancake” 200k KM 1982 300D Light Ivory “Butter” 183k 1984 300TD Black “Pepper” 55k |
#10
|
|||
|
|||
Quote:
Quote:
Was the nozzle able to produce a fairly narrow pattern and not just blast adhesive spray all over? As you can see from the example picture that I attached, my need is reglueing fairly narrow areas where the adhesive has aged to the point of giving out. So, so to speak, I'm seeking to kind of "tuck-in" those relatively small areas - mostly round the perimeter of the mats. This was why I had originally figured that I would have to use something more along the lines of a glue from a tube. Any thoughts? Thanks again- |
#11
|
|||
|
|||
Quote:
Second, can you elaborate a bit on what happened with using the dap? |
#12
|
||||
|
||||
Quote:
There are a couple spots that haven’t set up/are still tacky weeks later. The rest is SOLIDLY adhered though. Any of the spray adhesives I tried felt too thin to really grab the back of the carpet/foam and make a strong bond after I did two coats of POR 15 in the entire car. Spray was fine for roof insulation though! I need to update my restoration thread, got waylaid by a mechanical issue and had to stop the fun stuff.
__________________
1985 300D Surfblau "Blueberry" 250K R.I.P 1984 300CD Manila Beige "The Banana" 238K R.I.P 1984 300TD Cypress Green "Olive" 390K (M.I.A.) 1982 300D Orient Red "Steak" 195K 1985 Euro 300TD Lapis Blue “Pancake” 200k KM 1982 300D Light Ivory “Butter” 183k 1984 300TD Black “Pepper” 55k |
#13
|
|||
|
|||
Quote:
Quote:
Thanks for the feedback. |
#14
|
||||
|
||||
Yes, as far as I remember. I have always used it with the widest nozzle setting, but I am pretty sure the narrower setting is what you are looking for.
__________________
All Diesel Fleet 1985 R107 300SLD TURBODIESEL 2005 E320 CDI (daily) LOTS of parts for sale! EGR block kit http://www.peachparts.com/shopforum/diesel-discussion/355250-sale-egr-delete-block-off-plate-kit.html 1985 CA emissions 617 owners- You Need This! Sanden style A/C Compressor Mounting Kit for your 616/ 617 For Sale + Install Inst. Sanden Instalation Guide (post 11): http://www.peachparts.com/shopforum/diesel-discussion/367883-sanden-retrofit-installation-guide.html |
#15
|
||||
|
||||
Quote:
|
Bookmarks |
|
|